#!/bin/bash
#
# Copyright 2017, 2019 Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# -----------------------------------------------------------------------------
#
# This script can perform the following changes on
# the USB version of on Slackware Live Edition.
# - upgrade the kernel and modules
# - add network support modules for PXE boot (if missing)
# - increase (or decrease) USB wait time during boot
# - replace the Live init script inside the initrd image
# - move current persistence data to a new squashfs module in 'addons'
#
# -----------------------------------------------------------------------------
# Be careful:
set -e
# Limit the search path:
export PATH="/usr/sbin:/sbin:/usr/bin:/bin"
# ---------------------------------------------------------------------------
# START possible tasks to be executed by the script:
# ---------------------------------------------------------------------------
# By default do not move persistence data into a new Live module:
CHANGES2SXZ=0
# Replace the live 'init' script with the file $LIVEINIT:
LIVEINIT=""
# Do we need to add network support? This can be enforced through commandline,
# otherwise will be determined by examining the original kernelmodules:
NETSUPPORT=""
# This will be set to '1' if the user wants to restore the backups of the
# previous kernel and modules:
RESTORE=0
# Set default for 'do we update the kernel':
UPKERNEL=0
# Do not change usb wait time by default:
WAIT=-1
# ---------------------------------------------------------------------------
# END possible tasks to be executed by the script:
# ---------------------------------------------------------------------------
# Determine whether the USB stick has a supported kernel configuration
# i.e. one active and optionally one backup kernel plus mmodules:
SUPPORTED=1
# Values obtained from the init script on the USB:
DEF_KBD=""
DEF_LOCALE=""
DEF_TZ=""
DISTRO=""
LIVE_HOSTNAME=""
LIVEMAIN=""
LIVEUID=""
MARKER=""
MEDIALABEL=""
PERSISTENCE=""
CORE2RAMMODS=""
SQ_EXT_AVAIL=""
VERSION=""
# By default we make a backup of your old kernel/modules when adding new ones:
KBACKUP=1
# Does the initrd contain an old kernel that we can restore?
# The 'read_initrd' routing may set this to '0':
KRESTORE=1
# Timeout when scanning for inserted USB device, 30 seconds by default,
# but this default can be changed from outside the script:
SCANWAIT=${SCANWAIT:-30}
# By default do not show file operations in detail:
VERBOSE=0
# Set to '1' if we are to scan for device insertion:
SCAN=0
# Minimim free space (in MB) we want to have left in any partition
# after we are done.
# The default value can be changed from the environment:
MINFREE=${MINFREE:-10}
# Variables to store content from an initrd we are going to refresh:
OLDKERNELSIZE=""
OLDKMODDIRSIZE=""
OLDKVER=""
OLDWAIT=""
# Record the version of the new kernel:
KVER=""
# Define ahead of time, so that cleanup knows about them:
IMGDIR=""
KERDIR=""
USBMNT=""
EFIMNT=""
# These tools are required by the script, we will check for their existence:
REQTOOLS="cpio gdisk inotifywait lsblk strings xz"
# Compressor used on the initrd ("gzip" or "xz --check=crc32");
# Note that the kernel's XZ decompressor does not understand CRC64:
COMPR="xz --check=crc32"
# -- START: Taken verbatim from make_slackware_live.sh -- #
# List of kernel modules required for a live medium to boot properly;
# Lots of HID modules added to support keyboard input for LUKS password entry:
KMODS=${KMODS:-"squashfs:overlay:loop:xhci-pci:ohci-pci:ehci-pci:xhci-hcd:uhci-hcd:ehci-hcd:mmc-core:mmc-block:sdhci:sdhci-pci:sdhci-acpi:usb-storage:hid:usbhid:i2c-hid:hid-generic:hid-apple:hid-cherry:hid-logitech:hid-logitech-dj:hid-logitech-hidpp:hid-lenovo:hid-microsoft:hid_multitouch:jbd:mbcache:ext3:ext4:isofs:fat:nls_cp437:nls_iso8859-1:msdos:vfat:ntfs"}
# Network kernel modules to include for NFS root support:
NETMODS="kernel/drivers/net kernel/drivers/virtio"
# Network kernel modules to exclude from above list:
NETEXCL="appletalk arcnet bonding can dummy.ko hamradio hippi ifb.ko irda macvlan.ko macvtap.ko pcmcia sb1000.ko team tokenring tun.ko usb veth.ko wan wimax wireless xen-netback.ko"
# -- END: Taken verbatim from make_slackware_live.sh -- #
#
# -- function definitions --
#
# Clean up in case of failure:
cleanup() {
# Clean up by unmounting our loopmounts, deleting tempfiles:
echo "--- Cleaning up the staging area..."
# During cleanup, do not abort due to non-zero exit code:
set +e
sync
# No longer needed:
[ -n "${IMGDIR}" ] && ( rm -rf $IMGDIR )
[ -n "${KERDIR}" ] && ( rm -rf $KERDIR )
if [ -n "${USBMNT}" ]; then
if mount |grep -qw ${USBMNT} ; then umount ${USBMNT} ; fi
rm -rf $USBMNT
fi
if [ -n "${EFIMNT}" ]; then
if mount |grep -qw ${EFIMNT} ; then umount ${EFIMNT} ; fi
rm -rf $EFIMNT
fi
set -e
} # End of cleanup()
trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM
# Show the help text for this script:
showhelp() {
cat <<EOT
#
# Purpose: to update the content of a Slackware Live USB stick.
#
# $(basename $0) accepts the following parameters:
# -b|--nobackup Do not try to backup original kernel and modules.
# -d|--devices List removable devices on this computer.
# -h|--help This help.
# -i|--init <filename> Replacement init script.
# -k|--kernel <filename> The kernel file (or package).
# -m|--kmoddir <name> The kernel modules directory (or package).
# -n|--netsupport Add network boot support if not yet present.
# -o|--outdev <filename> The device name of your USB drive.
# -p|--persistence Move persistent data into new Live module.
# -r|--restore Restore previous kernel and modules.
# -s|--scan Scan for insertion of new USB device instead of
# providing a devicename (using option '-o').
# -v|--verbose Show verbose messages.
# -w|--wait<number> Add <number> seconds wait time to initialize USB.
#
EOT
} # End of showhelp()
# Scan for insertion of a USB device:
scan_devices() {
local BD
# Inotifywatch does not trigger on symlink creation,
# so we can not watch /sys/block/
BD=$(inotifywait -q -t ${SCANWAIT} -e create /dev 2>/dev/null |cut -d' ' -f3)
echo ${BD}
} # End of scan_devices()
# Show a list of removable devices detected on this computer:
show_devices() {
local MYDATA="${*}"
if [ -z "${MYDATA}" ]; then
MYDATA="$(ls --indicator-style=none /sys/block/ |grep -Ev '(ram|loop|dm-)')"
fi
echo "# Removable devices detected on this computer:"
for BD in ${MYDATA} ; do
if [ $(cat /sys/block/${BD}/removable) -eq 1 ]; then
echo "# /dev/${BD} : $(cat /sys/block/${BD}/device/vendor 2>/dev/null) $(cat /sys/block/${BD}/device/model 2>/dev/null): $(( $(cat /sys/block/${BD}/size) / 2048)) MB"
fi
done
echo "#"
} # End of show_devices()
# Uncompress the initrd based on the compression algorithm used:
uncompressfs () {
if $(file "${1}" | grep -qi ": gzip"); then
gzip -cd "${1}"
elif $(file "${1}" | grep -qi ": XZ"); then
xz -cd "${1}"
fi
} # End of uncompressfs ()
# Collect the kernel modules we need for the liveslak initrd.
# When calling this function, the old module tree must already
# have been renamed to ${OLDKVER}.prev
collect_kmods() {
local IMGDIR="$1"
# Borrow (and mangle) code from Slackware's mkinitrd
# to convert the KMODS variable into a collection of modules:
# Sanitize the modules list first, before any further processing.
# The awk command eliminates doubles without changing the order:
KMODS=$(echo $KMODS |tr -s ':' '\n' |awk '!x[$0]++' |tr '\n' ':')
KMODS=$(echo ${KMODS%:}) # Weed out a trailing ':'
# Count number of modules
# This INDEX number gives us an easy way to find individual
# modules and their arguments, as well as tells us how many
# times to run through the list
if ! echo $KMODS | grep ':' > /dev/null ; then # only 1 module specified
INDEX=1
else
# Trim excess ':' which will screw this routine:
KMODS=$(echo $KMODS | tr -s ':')
INDEX=1
while [ ! "$(echo "$KMODS" | cut -f $INDEX -d ':' )" = "" ]; do
INDEX=$(expr $INDEX + 1)
done
INDEX=$(expr $INDEX - 1) # Don't include the null value
fi
mkdir -p $IMGDIR/lib/modules/${KVER}
# Wrap everything in a while loop
i=0
while [ $i -ne $INDEX ]; do
i=$(( $i + 1 ))
# FULL_MOD is the module plus any arguments (if any)
# MODULE is the module name
# ARGS is any optional arguments to be passed to the kernel
FULL_MOD="$(echo "$KMODS" | cut -d ':' -f $i)"
MODULE="$(echo "$FULL_MOD" | cut -d ' ' -f 1 )"
# Test for arguments
if echo "$FULL_MOD" | grep ' ' > /dev/null; then
ARGS=" $(echo "$FULL_MOD" | cut -d ' ' -f 2- )"
else
unset ARGS
fi
# Get MODULE deps and prepare modprobe lines
modprobe --dirname ${KMODDIR%%/lib/modules/${KVER}} --set-version $KVER --show-depends --ignore-install $MODULE 2>/dev/null \
| grep "^insmod " | cut -f 2 -d ' ' | while read SRCMOD; do
if ! grep -Eq " $(basename $SRCMOD .ko)(\.| |$)" $IMGDIR/load_kernel_modules 2>/dev/null ; then
LINE="$(echo "modprobe -v $(basename ${SRCMOD%%.gz} .ko)" )"
# Test to see if arguments should be passed
# Over-ride the previously defined LINE variable if so
if [ "$(basename $SRCMOD .ko)" = "$MODULE" ]; then
# SRCMOD and MODULE are same, ARGS can be passed
LINE="$LINE$ARGS"
fi
fi
if ! grep -qx "$LINE" $IMGDIR/load_kernel_modules ; then
echo "$LINE" >> $IMGDIR/load_kernel_modules
fi
# Try to add the module to the initrd-tree. This should be done
# even if it exists there already as we may have changed compilers
# or otherwise caused the modules in the initrd-tree to need
# replacement.
cd ${KMODDIR}
# Need to strip ${KMODDIR} from the start of ${SRCMOD}:
cp -a --parents $(echo $SRCMOD |sed 's|'${KMODDIR}'/|./|' ) $IMGDIR/lib/modules/${KVER}/ 2>/dev/null
COPYSTAT=$?
cd - 1>/dev/null
if [ $COPYSTAT -eq 0 ]; then
if [ $VERBOSE -eq 1 ]; then
echo "OK: $SRCMOD added."
fi
# If a module needs firmware, copy that too
modinfo -F firmware "$SRCMOD" | sed 's/^/\/lib\/firmware\//' |
while read SRCFW; do
if cp -a --parents "$SRCFW" $IMGDIR 2>/dev/null; then
if [ $VERBOSE -eq 1 ]; then
echo "OK: $SRCFW added."
fi
else
echo "*** WARNING: Could not find firmware \"$SRCFW\""
fi
done
else
echo "*** WARNING: Could not find module \"$SRCMOD\""
fi
unset COPYSTAT
done
done
# End of Slackware mkinitrd code.
# Do we have to add network support?
if [ $NETSUPPORT -eq 1 ]; then
# The initrd already contains dhcpcd so we just need to add kmods:
for NETMODPATH in ${NETMODS} ; do
cd ${KMODDIR}
mkdir -p ${IMGDIR}/lib/modules/${KVER}
cp -a --parents ${NETMODPATH} ${IMGDIR}/lib/modules/${KVER}/
cd - 1>/dev/null
# Prune the ones we do not need:
for KNETRM in ${NETEXCL} ; do
find ${IMGDIR}/lib/modules/${KVER}/${NETMODPATH} \
-name $KNETRM -depth -exec rm -rf {} \;
done
# Add any dependency modules:
for MODULE in $(find ${IMGDIR}/lib/modules/${KVER}/${NETMODPATH} -type f -exec basename {} .ko \;) ; do
modprobe --dirname ${KMODDIR%%/lib/modules/${KVER}} --set-version $KVER --show-depends --ignore-install $MODULE 2>/dev/null |grep "^insmod " |cut -f 2 -d ' ' |while read SRCMOD; do
if [ "$(basename $SRCMOD .ko)" != "$MODULE" ]; then
cd ${KMODDIR}
# Need to strip ${KMODDIR} from the start of ${SRCMOD}:
cp -a --parents $(echo $SRCMOD |sed 's|'${KMODDIR}'/|./|' ) \
${IMGDIR}/lib/modules/${KVER}/
cd - 1>/dev/null
fi
done
done
done
fi
# We added extra modules to the initrd, so we run depmod again:
if [ $VERBOSE -eq 1 ]; then
chroot ${IMGDIR} depmod $KVER
else
chroot ${IMGDIR} depmod $KVER 2>/dev/null
fi
} # End of collect_kmods ()
# Read configuration data from old initrd:
read_initrd() {
local IMGDIR="$1"
cd ${IMGDIR}
# Retrieve the currently defined USB wait time:
OLDWAIT=$(cat ./wait-for-root)
# Read the values of liveslak template variables in the init script:
for TEMPLATEVAR in DEF_KBD DEF_LOCALE DEF_TZ DISTRO LIVE_HOSTNAME LIVEMAIN LIVEUID MARKER MEDIALABEL PERSISTENCE CORE2RAMMODS SQ_EXT_AVAIL VERSION ; do
eval $(grep "^ *${TEMPLATEVAR}=" ./init |head -1)
done
if [ $RESTORE -eq 1 ]; then
# Add '||true' because grep's exit code '1' may abort the script:
PREVMODDIR=$(find ./lib/modules -type d -mindepth 1 -maxdepth 1 |grep .prev || true)
if [ -n "${PREVMODDIR}" ] ; then
KRESTORE=1
else
echo "--- No backed-up kernel modules detected in '${IMGFILE}'."
KRESTORE=0
fi
fi
if [ $UPKERNEL -eq 1 ]; then
OLDMODDIR=$(find ./lib/modules -type d -mindepth 1 -maxdepth 1 |grep -v .prev)
if [ $(echo ${OLDMODDIR} |wc -w) -gt 1 ] ; then
echo "*** Multiple kernelmodule trees detected in '${IMGFILE}'."
SUPPORTED=0
else
OLDKVER=$(basename "${OLDMODDIR}")
OLDKMODDIRSIZE=$(du -sm "${OLDMODDIR}" |tr '\t' ' ' |cut -d' ' -f1)
# Find out if the old kernel contains network support.
# Use presence of 'devlink.ko' in the old tree to determine this,
# but allow for a pre-set override value based on commandline preference:
if [ -f ${OLDMODDIR}/kernel/net/core/devlink.ko ]; then
NETSUPPORT=${NETSUPPORT:-1}
else
NETSUPPORT=${NETSUPPORT:-0}
fi
fi
fi
} # End read_initrd()
# Extract the initrd:
extract_initrd() {
local IMGFILE="$1"
cd ${IMGDIR}
uncompressfs ${IMGFILE} \
| cpio -i -d -m -H newc
} # End of extract_initrd()
# Modify the extracted initrd and re-pack it:
update_initrd() {
local IMGFILE="$1"
local NEED_RECOMP=0
cd ${IMGDIR}
if [ ${WAIT} -ge 0 ]; then
if [ $WAIT != $OLDWAIT ]; then
echo "--- Updating 'waitforroot' time from '$OLDWAIT' to '$WAIT'"
echo ${WAIT} > wait-for-root
NEED_RECOMP=1
fi
fi
if [ $UPKERNEL -eq 1 ]; then
OLDMODDIR=$(find ./lib/modules -type d -mindepth 1 -maxdepth 1 |grep -v .prev)
rm -rf ./lib/modules/*.prev
if [ $KBACKUP -eq 1 ]; then
# We make one backup:
if [ $VERBOSE -eq 1 ]; then
echo "--- Making backup of kernel modules"
fi
mv -i ${OLDMODDIR} ${OLDMODDIR}.prev
else
echo "--- No room for backing up old kernel modules"
rm -rf ${OLDMODDIR}
fi
# Add modules for the new kernel:
echo "--- Adding new kernel modules"
collect_kmods ${IMGDIR}
NEED_RECOMP=1
elif [ $RESTORE -eq 1 -a $KRESTORE -eq 1 ]; then
# Restore previous kernel module tree.
# The 'read_initrd' routine will already have checked that we have
# one active and one .prev modules tree:
OLDMODDIR=$(find ./lib/modules -type d -mindepth 1 -maxdepth 1 |grep .prev || true)
NEWMODDIR=$(find ./lib/modules -type d -mindepth 1 -maxdepth 1 |grep -v .prev)
echo "--- Restoring old kernel modules"
rm -rf ${NEWMODDIR}
mv ${OLDMODDIR} ${OLDMODDIR%.prev}
NEED_RECOMP=1
fi
if [ -n "${LIVEINIT}" ]; then
echo "--- Replacing live init script"
cp ./init ./init.prev
if grep -q "@LIVEMAIN@" ${LIVEINIT} ; then
# The provided init is a liveinit template, and we need
# to substitute the placeholders with actual values:
parse_template ${LIVEINIT} $(pwd)/init
else
cat ${LIVEINIT} > ./init
fi
NEED_RECOMP=1
fi
if [ ${NEED_RECOMP} -eq 1 ]; then
echo "--- Compressing the initrd image again"
chmod 0755 ${IMGDIR}
find . |cpio -o -H newc |$COMPR > ${IMGFILE}
fi
cd - 1>/dev/null # End of 'cd ${IMGDIR}'
} # End of update_initrd()
# Accept either a kernelimage or a packagename,
# and return the path to a kernelimage:
getpath_kernelimg () {
local MYDATA="${*}"
[ -z "${MYDATA}" ] && echo ""
if [ -n "$(file "${MYDATA}" |grep -E 'x86 boot (executable|sector)')" ]; then
# We have a kernel image:
echo "${MYDATA}"
else
# We assume a Slackware package:
# Extract the generic kernel from the package and return its filename:
tar --wildcards -C ${KERDIR} -xf ${MYDATA} boot/vmlinuz-generic-*
echo "$(ls --indicator-style=none ${KERDIR}/boot/vmlinuz-generic-*)"
fi
} # End of getpath_kernelimg
# Accept either a directory containing module tree, or a packagename,
# and return the path to a module tree:
getpath_kernelmods () {
local MYDATA="${*}"
[ -z "${MYDATA}" ] && echo ""
if [ -d "${MYDATA}" ]; then
# We have directory, assume it contains the kernel modules:
echo "${MYDATA}"
else
# We assume a Slackware package:
# Extract the kernel modules from the package and return the path:
tar -C ${KERDIR} -xf ${MYDATA} lib/modules
cd ${KERDIR}/lib/modules/*
pwd
fi
} # End of getpath_kernelmods
# Determine size of a mounted partition (in MB):
get_part_mb_size() {
local MYSIZE
MYSIZE=$(df -P -BM ${1} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f2)
echo "${MYSIZE%M}"
} # End of get_part_mb_size
# Determine free space of a mounted partition (in MB):
get_part_mb_free() {
local MYSIZE
MYSIZE=$(df -P -BM ${1} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
echo "${MYSIZE%M}"
} # End of get_part_mb_free
parse_template() {
# Parse a liveslak template file and substitute the placeholders.
local INFILE="$1"
local OUTFILE="$2"
# We expect these variables to be set before calling this function.
# But, we do provide default values.
DISTRO=${DISTRO:-slackware}
VERSION=${VERSION:-1337}
cat ${INFILE} | sed \
-e "s/@LIVEMAIN@/${LIVEMAIN:-liveslak}/g" \
-e "s/@MARKER@/${MARKER:-LIVESLAK}/g" \
-e "s/@MEDIALABEL@/${MEDIALABEL:-LIVESLAK}/g" \
-e "s/@PERSISTENCE@/${PERSISTENCE:-persistence}/g" \
-e "s/@DARKSTAR@/${LIVE_HOSTNAME:-darkstar}/g" \
-e "s/@LIVEUID@/${LIVEUID:-live}/g" \
-e "s/@LIVEUIDNR@/${LIVEUIDNR:-1000}/g" \
-e "s/@DISTRO@/$DISTRO/g" \
-e "s/@CDISTRO@/${DISTRO^}/g" \
-e "s/@UDISTRO@/${DISTRO^^}/g" \
-e "s/@CORE2RAMMODS@/${CORE2RAMMODS:-"min noxbase"}/g" \
-e "s/@VERSION@/${VERSION}/g" \
-e "s/@KVER@/$KVER/g" \
-e "s/@SQ_EXT_AVAIL@/${SQ_EXT_AVAIL}/g" \
-e "s,@DEF_KBD@,${DEF_KBD},g" \
-e "s,@DEF_LOCALE@,${DEF_LOCALE},g" \
-e "s,@DEF_TZ@,${DEF_TZ},g" \
> ${OUTFILE}
} # End of parse_template()
#
# -- end of function definitions --
#
# ===========================================================================
# Parse the commandline parameters:
if [ -z "$1" ]; then
showhelp
exit 1
fi
while [ ! -z "$1" ]; do
case $1 in
-b|--nobackup)
KBACKUP=0
shift
;;
-d|--devices)
show_devices
exit
;;
-h|--help)
showhelp
exit
;;
-i|--init)
LIVEINIT="$(cd "$(dirname "$2")"; pwd)/$(basename "$2")"
shift 2
;;
-k|--kernel)
KERNEL="$(cd "$(dirname "$2")"; pwd)/$(basename "$2")"
shift 2
;;
-m|--kmoddir)
KMODDIR="$(cd "$(dirname "$2")"; pwd)/$(basename "$2")"
shift 2
;;
-n|--netsupport)
NETSUPPORT=1
shift
;;
-o|--outdev)
TARGET="$2"
shift 2
;;
-p|--persistence)
CHANGES2SXZ=1
shift
;;
-r|--restore)
RESTORE=1
shift
;;
-s|--scan)
SCAN=1
shift
;;
-v|--verbose)
VERBOSE=1
shift
;;
-w|--wait)
WAIT="$2"
shift 2
;;
*)
echo "*** Unknown parameter '$1'!"
exit 1
;;
esac
done
# Before we start:
if [ "$(id -u)" != "0" ]; then
echo "*** You need to be root to run $(basename $0)."
exit 1
fi
#
# More sanity checks:
#
# Either provide a block device, or else scan for a block device:
if [ -z "$TARGET" ]; then
if [ $SCAN -eq 1 ]; then
echo "-- Waiting ${SCANWAIT} seconds for a USB stick to be inserted..."
TARGET=$(scan_devices)
if [ -z "$TARGET" ]; then
echo "*** No new USB device detected during $SCANWAIT seconds scan."
exit 1
else
TARGET="/dev/${TARGET}"
fi
else
echo "*** You must specify the Live USB devicename (option '-o')!"
exit 1
fi
elif [ $SCAN -eq 1 ]; then
echo "*** You can not use options '-o' and '-s' at the same time!"
exit 1
fi
if [ ! -e /sys/block/$(basename $TARGET) ]; then
echo "*** Not a block device: '$TARGET' !"
show_devices
exit 1
elif lsblk -l $TARGET |grep -w $(basename $TARGET) |grep -wq part ; then
echo "*** You need to point to the storage device itself, not a partition ($TARGET)!"
show_devices
exit 1
fi
if [ -z "$KERNEL" -a -z "$KMODDIR" ]; then
# We don't need to update the kernel/modules:
UPKERNEL=0
else
if [ $RESTORE -eq 1 ]; then
echo "*** You can not use options '-k'/'-m' and '-r' at the same time!"
exit 1
fi
# If we get here, we have one or both '-k' and '-m'.
# Sanitize the input values of '-k' and '-m':
if [ -z "$KERDIR" ]; then
# Create a temporary extraction directory:
mkdir -p /mnt
KERDIR=$(mktemp -d -p /mnt -t alienker.XXXXXX)
if [ ! -d $KERDIR ]; then
echo "*** Failed to create temporary extraction dir for the kernel!"
cleanup
exit 1
fi
fi
KERNEL="$(getpath_kernelimg ${KERNEL})"
KMODDIR="$(getpath_kernelmods ${KMODDIR})"
if [ ! -f "${KERNEL}" -o ! -d "${KMODDIR}" ]; then
echo "*** You need to provide the path to a kernel imagefile (-k),"
echo "*** as well as the directory containing the kernel modules (-m)!"
cleanup
exit 1
else
# Determine the new kernel version from a module,
# rather than from a directory- or filenames:
KVER=$(strings $(find ${KMODDIR}/kernel/ -name "*.ko*" |head -1) |grep ^vermagic |cut -d= -f2 |cut -d' ' -f1)
if [ -z "${KVER}" ]; then
echo "*** Could not determine kernel version from the module directory"
echo "*** (querying module kernel/fs/overlayfs/overlay.ko)!"
cleanup
exit 1
fi
UPKERNEL=1
fi
fi
if [ -n "${LIVEINIT}" -a ! -f "${LIVEINIT}" ]; then
echo "*** The replacement init script '${LIVEINIT}' is not a file!'"
cleanup
exit 1
fi
if [ $CHANGES2SXZ -eq 1 ]; then
# We need to create a module, so add squashfs to the required tools:
REQTOOLS="${REQTOOLS} mksquashfs"
fi
# Are all the required tools present?
PROG_MISSING=""
for PROGN in ${REQTOOLS} ; do
if ! which $PROGN 1>/dev/null 2>/dev/null ; then
PROG_MISSING="${PROG_MISSING}-- $PROGN\n"
fi
done
if [ ! -z "$PROG_MISSING" ] ; then
echo "-- Required program(s) not found in search path '$PATH'!"
echo -e ${PROG_MISSING}
echo "-- Exiting."
cleanup
exit 1
fi
# We are refreshing the Live content.
# Confirm refresh:
cat <<EOT
#
# We are going to update the Live OS on this device.
# ---------------------------------------------------------------------------
# Target is - '$TARGET':
# Vendor : $(cat /sys/block/$(basename $TARGET)/device/vendor 2>/dev/null)
# Model : $(cat /sys/block/$(basename $TARGET)/device/model 2>/dev/null)
# Size : $(( $(cat /sys/block/$(basename $TARGET)/size) / 2048)) MB
# ---------------------------------------------------------------------------
#
# FDISK OUTPUT:
EOT
echo q |gdisk -l $TARGET 2>/dev/null | \
while read LINE ; do echo "# $LINE" ; done
# If the user just used the scan option (-s) and did not select a task,
# we will exit the script gracefully now:
if [[ $WAIT -lt 0 && $UPKERNEL -ne 1 && $RESTORE -ne 1 && $NETSUPPORT -ne 1 && $LIVEINIT = "" && $CHANGES2SXZ -ne 1 ]]; then
cleanup
exit 0
else
# We have one or more tasks to execute, allow user to back out:
cat <<EOT
*** ***
*** If this is the wrong drive, then press CONTROL-C now! ***
*** ***
EOT
read -p "Or press ENTER to continue: " JUNK
fi
# OK... the user was sure about the drive...
# Determine the three partition names independently of storage architecture:
TARGETP1=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]1$')
TARGETP2=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]2$')
TARGETP3=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]3$')
# Create a temporary extraction directory for the initrd:
mkdir -p /mnt
IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
if [ ! -d $IMGDIR ]; then
echo "*** Failed to create temporary extraction directory for the initrd!"
cleanup
exit 1
fi
chmod 711 $IMGDIR
# Create temporary mount point for the USB device:
mkdir -p /mnt
# USB mounts:
USBMNT=$(mktemp -d -p /mnt -t alienusb.XXXXXX)
if [ ! -d $USBMNT ]; then
echo "*** Failed to create a temporary mount point for the USB device!"
cleanup
exit 1
else
chmod 711 $USBMNT
fi
EFIMNT=$(mktemp -d -p /mnt -t alienefi.XXXXXX)
if [ ! -d $EFIMNT ]; then
echo "*** Failed to create a temporary mount point for the USB device!"
cleanup
exit 1
else
chmod 711 $EFIMNT
fi
# Mount the Linux partition:
mount -t auto ${TARGETP3} ${USBMNT}
# Mount the EFI partition:
mount -t vfat -o shortname=mixed ${TARGETP2} ${EFIMNT}
# Determine size of the Linux partition (in MB), and the free space:
USBPSIZE=$(get_part_mb_size ${USBMNT})
USBPFREE=$(get_part_mb_free ${USBMNT})
# Determine size of the EFI partition (in MB), and the free space:
EFIPSIZE=$(get_part_mb_size ${EFIMNT})
EFIPFREE=$(get_part_mb_free ${EFIMNT})
# Record the Slackware Live version:
OLDVERSION="$(cat ${USBMNT}/.isoversion 2>/dev/null)"
echo "-- The medium '${TARGET}' contains '${OLDVERSION}'"
# Find out if the USB contains an EFI bootloader and use it:
if [ ! -f ${EFIMNT}/EFI/BOOT/boot*.efi ]; then
EFIBOOT=0
echo "-- Note: UEFI boot file 'bootx64.efi' or 'bootia32.efi' not found on ISO."
echo "-- UEFI boot will not be supported"
else
EFIBOOT=1
fi
# Record the size of the running kernel:
if [ -f "${USBMNT}/boot/vmlinuz*" ]; then
KIMG="$(find ${USBMNT}/boot/ -type f -name \"vmlinuz*\" |grep -v prev)"
else
# Default liveslak kernelname:
KIMG="${USBMNT}/boot/generic"
fi
OLDKERNELSIZE=$(du -sm "${KIMG}" |tr '\t' ' ' |cut -d' ' -f1)
# Collect data from the USB initrd:
extract_initrd ${USBMNT}/boot/initrd.img
read_initrd ${IMGDIR}
# The read_initrd routine will set SUPPORTED to '0'
# if it finds a non-standard configuration for kernel & modules:
if [ $KBACKUP -eq 1 ]; then
if [ $SUPPORTED -ne 1 ]; then
echo "*** ${TARGET} has an unsupported kernel configuration."
echo "*** Exiting now."
cleanup
exit 1
else
# If free space is low, require '-b' to skip make a backup (unsafe).
if [ $(( $USBPFREE - $OLDKMODDIRSIZE - $OLDKERNELSIZE )) -lt $MINFREE ]; then
KBACKUP=-1
fi
if [ $EFIBOOT -eq 1 -a $(( $EFIPFREE - $OLDKMODDIRSIZE - $OLDKERNELSIZE )) -lt $MINFREE ]; then
KBACKUP=-1
fi
if [ $KBACKUP -eq -1 ]; then
echo "*** Not enough free space for a backup of old kernel and modules."
echo "*** If you want to update your kerel anyway (without backup) then"
echo "*** you have to add the parameter '-b' to the commandline."
cleanup
exit 1
fi
fi
fi
# Update the initrd with regard to USB wait time, liveinit, kernel:
update_initrd ${USBMNT}/boot/initrd.img
# Take care of the kernel in the Linux partition:
if [ $UPKERNEL -eq 1 ]; then
if [ $KBACKUP -eq 1 ]; then
# We always make one backup with the suffix ".prev":
if [ $VERBOSE -eq 1 ]; then
echo "-- Backing up ${KIMG} to ${USBMNT}/boot/$(basename \"${KIMG}\").prev"
fi
mv "${KIMG}" ${USBMNT}/boot/$(basename "${KIMG}").prev
else
rm -rf "${KIMG}"
fi
# And we name our new kernel exactly as the old one:
if [ $VERBOSE -eq 1 ]; then
echo "-- Copying \"${KERNEL}\" to ${USBMNT}/boot/$(basename \"${KIMG}\")"
fi
cp "${KERNEL}" ${USBMNT}/boot/$(basename "${KIMG}")
elif [ $RESTORE -eq 1 -a $KRESTORE -eq 1 ]; then
if [ $VERBOSE -eq 1 ]; then
echo "-- Restoring ${USBMNT}/boot/$(basename \"${KIMG}\").prev to ${KIMG}"
fi
rm -f "${KIMG}"
mv ${USBMNT}/boot/$(basename "${KIMG}").prev "${KIMG}"
fi
if [ $EFIBOOT -eq 1 ]; then
# Refresh the kernel/initrd on the EFI partition:
if [ $VERBOSE -eq 1 ]; then
rsync -rlptD --delete -v ${USBMNT}/boot/* ${EFIMNT}/boot/
else
rsync -rlptD --delete ${USBMNT}/boot/* ${EFIMNT}/boot/
fi
sync
fi
if [ $CHANGES2SXZ -eq 1 ]; then
if [ ! -d /mnt/live/changes ]; then
echo "*** No directory '/mnt/live/changes' exists!"
echo "*** This script must be executed when running ${DISTRO^} Live Edition"
else
# We need to be able to write to the partition:
mount -o remount,rw ${USBMNT}
# Tell init to wipe the original persistence data at next boot:
touch /mnt/live/changes/.wipe 2>/dev/null || true
if [ ! -f /mnt/live/changes/.wipe ]; then
echo "*** Unable to create file '/mnt/live/changes/.wipe'!"
echo "*** Are you sure you are running ${DISTRO^} Live Edition?"
else
# Squash the persistence data into a Live .sxz module:
LIVE_MOD_SYS=$(dirname $(find ${USBMNT} -name "0099-${DISTRO}_zzzconf*.sxz" |head -1))
LIVE_MOD_ADD=$(dirname ${LIVE_MOD_SYS})/addons
MODNAME="0100-${DISTRO}_customchanges-$(date +%Y%m%d%H%M%S).sxz"
echo "-- Moving current persistence data into addons module '${MODNAME}'"
mksquashfs /mnt/live/changes ${LIVE_MOD_ADD}/${MODNAME} -noappend -comp xz -b 1M -e .wipe
fi
fi
fi
# Unmount/remove stuff:
cleanup
# THE END
