#!/bin/bash
#
# Copyright 2015, 2016, 2017, 2019, 2020 Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Be careful:
set -e
# Limit the search path:
export PATH="/usr/sbin:/sbin:/usr/bin:/bin"
# Set to '1' if you want to ignore all warnings:
FORCE=0
# The default layout of the USB stick is:
# partition 1 (1MB),
# partition 2 (100 MB)
# partition 3 (claim all free space - specified as 0 MB).
# The script allows for an amount of free space to be left at the end
# (partition 4, unused by liveslak) in case you need this:
DEF_LAYOUT="1,100,-1,"
# By default, we use 'slhome.img' as the name of the LUKS home containerfile.
DEF_SLHOME="slhome"
SLHOME="${DEF_SLHOME}"
# By default, we use 'persistence' as the name of the persistence directory,
# or 'persistence.img' as the name of the persistence container:
DEF_PERSISTENCE="persistence"
PERSISTENCE="${DEF_PERSISTENCE}"
# Default persistence type is a directory:
PERSISTTYPE="dir"
# Timeout when scanning for inserted USB device:
SCANWAIT=30
# Set to '1' if we are to scan for device insertion:
SCAN=0
# Set to '1' if the script should not ask any questions:
UNATTENDED=0
# By default do not show file operations in detail:
VERBOSE=0
# Variables to store content from an initrd we are going to refresh:
OLDPERSISTENCE=""
OLDWAIT=""
OLDLUKS=""
OLDVERSION=""
# Version information stored in the ISO file:
VERSION=""
# Seconds to add to the initrd as wait-for-root value:
WAIT=5
# No LUKS encryption by default:
DOLUKS=0
# We are NOT refreshing existing Live content by default:
REFRESH=0
# These tools are required by the script, we will check for their existence:
REQTOOLS="blkid cpio extlinux fdisk gdisk isoinfo lsblk mkdosfs sgdisk syslinux wipefs"
# Path to syslinux files:
if [ -d /usr/share/syslinux ]; then
SYSLXLOC="/usr/share/syslinux"
GPTMBRBIN=$(find $SYSLXLOC -name gptmbr.bin)
elif [ -d /usr/lib/syslinux ]; then
SYSLXLOC="/usr/lib/syslinux"
GPTMBRBIN=$(find $SYSLXLOC -name gptmbr.bin)
else
# Should not happen... in this case we use what we have on the ISO
# and hope for the best:
SYSLXLOC="/"
GPTMBRBIN="gptmbr.bin"
fi
# Initialize more variables:
CNTBASE=""
CNTDEV=""
CNTFILE=""
HLUKSSIZE=""
LUKSHOME=""
LODEV=""
# Define ahead of time, so that cleanup knows about them:
IMGDIR=""
ISOMNT=""
CNTMNT=""
USBMNT=""
US2MNT=""
# Compressor used on the initrd ("gzip" or "xz --check=crc32");
# Note that the kernel's XZ decompressor does not understand CRC64:
COMPR="xz --check=crc32"
#
# -- function definitions --
#
# Clean up in case of failure:
cleanup() {
# Clean up by unmounting our loopmounts, deleting tempfiles:
echo "--- Cleaning up the staging area..."
# During cleanup, do not abort due to non-zero exit code:
set +e
sync
if [ $DOLUKS -eq 1 -a -n "$CNTDEV" ]; then
# In case of failure, only the most recent device should still be open:
if mount |grep -q ${CNTDEV} ; then
umount -f ${CNTDEV}
cryptsetup luksClose $(basename ${CNTBASE})
losetup -d ${LODEV}
fi
fi
[ -n "${ISOMNT}" ] && ( umount -f ${ISOMNT} 2>/dev/null; rmdir $ISOMNT 2>/dev/null )
[ -n "${CNTMNT}" ] && ( umount -f ${CNTMNT} 2>/dev/null; rmdir $CNTMNT 2>/dev/null )
[ -n "${USBMNT}" ] && ( umount -f ${USBMNT} 2>/dev/null; rmdir $USBMNT 2>/dev/null )
[ -n "${US2MNT}" ] && ( umount -f ${US2MNT} 2>/dev/null; rmdir $US2MNT 2>/dev/null )
[ -n "${IMGDIR}" ] && ( rm -rf $IMGDIR )
set -e
}
trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM
showhelp() {
cat <<EOT
#
# Purpose: to transfer the content of Slackware's Live ISO image
# to a standard USB thumb drive (or some other kind of external storage)
# and thus create a Slackware Live USB media.
#
# WARNING: Your USB thumb drive may contain data!
# If you are not using the refresh option '-r' then this data will be *erased* !
#
# $(basename $0) accepts the following parameters:
# -c|--crypt size|perc Add LUKS encrypted /home ; parameter is the
# requested size of the container in kB, MB, GB,
# or as a percentage of free space
# (integer numbers only).
# Examples: '-c 125M', '-c 2G', '-c 20%'.
# -d|--devices List removable devices on this computer.
# -f|--force Ignore most warnings (except the back-out).
# -h|--help This help.
# -i|--infile <filename> Full path to the ISO image file.
# -l|--lukshome <name> Custom path to the containerfile for your LUKS
# encrypted /home ($SLHOME by default).
# -o|--outdev <filename> The device name of your USB drive.
# -p|--persistence <name> Custom path to the 'persistence' directory
# or containerfile ($PERSISTENCE by default).
# -r|--refresh Refresh the USB stick with the ISO content.
# No formatting, do not touch user content.
# -s|--scan Scan for insertion of new USB device instead of
# providing a devicename (using option '-o').
# -u|--unattended Do not ask any questions.
# -v|--verbose Show verbose messages.
# -w|--wait <number> Add <number> seconds wait time to initialize USB.
# -y|--layout <x,x,x,x> Specify partition layout and sizes (in MB).
# Default values: '$DEF_LAYOUT' for 3 partitions,
# the '-1' value for partition 3 meaning
# 'use all remaining space',
# and an empty 4th value means 'do not reserve
# free space for a custom 4th partition'.
# -C|--cryptpersistfile size|perc
# Use a LUKS-encrypted 'persistence' file instead
# of a directory (for use on FAT filesystem)
# Format for size/percentage is the same
# as for the '-c' parameter.
# -P|--persistfile Use a 'persistence' container file instead of
# a directory (for use on FAT filesystem).
#
# Examples:
#
# $(basename $0) -i ~/download/slackware64-live-14.2.iso -o /dev/sdX
# $(basename $0) -i slackware64-live-xfce-current.iso -o /dev/mmcblkX -c 750M -w 15
# $(basename $0) -i slackware-live-current.iso -o /dev/sdX -y 1,200,-1,4096
#
EOT
}
# Uncompress the initrd based on the compression algorithm used:
uncompressfs () {
if $(file "${1}" | grep -qi ": gzip"); then
gzip -cd "${1}"
elif $(file "${1}" | grep -qi ": XZ"); then
xz -cd "${1}"
fi
}
# Scan for insertion of a USB device:
scan_devices() {
local BD
# Inotifywatch does not trigger on symlink creation,
# so we can not watch /sys/block/
BD=$(inotifywait -q -t ${SCANWAIT} -e create /dev 2>/dev/null |cut -d' ' -f3)
echo ${BD}
} # End of scan_devices()
# Show a list of removable devices detected on this computer:
show_devices() {
local MYDATA="${*}"
if [ -z "${MYDATA}" ]; then
MYDATA="$(ls --indicator-style=none /sys/block/ |grep -Ev '(ram|loop|dm-)')"
fi
echo "#"
echo "# Removable devices detected on this computer:"
for BD in ${MYDATA} ; do
if [ $(cat /sys/block/${BD}/removable) -eq 1 ]; then
echo "# /dev/${BD} : $(cat /sys/block/${BD}/device/vendor 2>/dev/null) $(cat /sys/block/${BD}/device/model 2>/dev/null): $(( $(cat /sys/block/${BD}/size) / 2048)) MB"
fi
done
echo "#"
} # End of show_devices()
# Read configuration data from old initrd:
read_initrd() {
IMGFILE="$1"
OLDPERSISTENCE=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout init |grep "^PERSISTENCE" |cut -d '"' -f2 2>/dev/null)
OLDWAIT=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout wait-for-root 2>/dev/null)
OLDLUKS=$(uncompressfs ${IMGFILE} |cpio -i --to-stdout luksdev 2>/dev/null)
}
# Add longer USB WAIT to the initrd:
update_initrd() {
IMGFILE="$1"
# USB boot medium needs a few seconds boot delay else the overlay will fail.
# Check if we need to update the wait-for-root file in the initrd:
if [ "$OLDWAIT" = "$WAIT" -a $DOLUKS -eq 0 -a $REFRESH -eq 0 ]; then
return
fi
if [ -z "$IMGDIR" ]; then
# Create a temporary extraction directory for the initrd:
mkdir -p /mnt
IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
if [ ! -d $IMGDIR ]; then
echo "*** Failed to create a temporary extraction directory for the initrd!"
exit 1
fi
fi
chmod 711 $IMGDIR
echo "--- Extracting Slackware initrd and adding rootdelay for USB..."
cd ${IMGDIR}
uncompressfs ${IMGFILE} \
| cpio -i -d -m -H newc
if [ $REFRESH -eq 1 ]; then
echo "--- Refreshing Slackware initrd..."
WAIT="$OLDWAIT"
if [ -n "$OLDLUKS" ]; then
echo "--- Detected LUKS container configuration:"
echo "$OLDLUKS" | sed 's/^/ /'
fi
echo "$OLDLUKS" >> luksdev
if [ "${PERSISTENCE}" != "${DEF_PERSISTENCE}" ]; then
# If the user specified a nonstandard persistence, use that:
echo "--- Updating persistence from '$OLDPERSISTENCE' to '$PERSISTENCE'"
sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${PERSISTENCE}\"," init
elif [ "${PERSISTENCE}" != "${OLDPERSISTENCE}" ]; then
# The user did not specify persistence, re-use the retrieved value:
sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${OLDPERSISTENCE}\"," init
echo "--- Re-use previous '$OLDPERSISTENCE' for persistence"
PERSISTENCE="${OLDPERSISTENCE}"
fi
else
if [ "${PERSISTENCE}" != "${DEF_PERSISTENCE}" ]; then
# If the user specified a nonstandard persistence, use that:
echo "--- Updating persistence from '$DEF_PERSISTENCE' to '$PERSISTENCE'"
sed -i -e "s,^PERSISTENCE=.*,PERSISTENCE=\"${PERSISTENCE}\"," init
fi
fi
echo "--- Updating 'waitforroot' time from '$OLDWAIT' to '$WAIT'"
echo ${WAIT} > wait-for-root
if [ $DOLUKS -eq 1 -a -n "${LUKSHOME}" ]; then
if ! grep -q ${LUKSHOME} luksdev ; then
echo "--- Adding '${LUKSHOME}' as LUKS /home:"
echo "${LUKSHOME}" >> luksdev
fi
fi
echo "--- Compressing the initrd image again:"
chmod 0755 ${IMGDIR}
find . |cpio -o -H newc |$COMPR > ${IMGFILE}
cd - 1>/dev/null
rm -rf $IMGDIR/*
} # End of update_initrd()
# Create a container file in the empty space of the partition
create_container() {
CNTPART=$1
CNTSIZE=$2
CNTBASE=$3
CNTENCR=$4 # 'none' or 'luks'
CNTUSED=$5 # '/home' or 'persistence'
# Create a container file or re-use previously created one:
if [ -f $USBMNT/${CNTBASE}.img ]; then
CNTFILE="${CNTBASE}.img"
CNTSIZE=$(( $(du -sk $USBMNT/${CNTFILE} |tr '\t' ' ' |cut -f1 -d' ') / 1024 ))
echo "--- Keeping existing '${CNTFILE}' (size ${CNTSIZE} MB)."
return
fi
# Determine size of the target partition (in MB), and the free space:
PARTSIZE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f2)
PARTSIZE=${PARTSIZE%M}
PARTFREE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
PARTFREE=${PARTFREE%M}
if [ $PARTFREE -lt 10 ]; then
echo "*** Free space on USB partition is less than 10 MB;"
echo "*** Not creating a container file!"
exit 1
fi
# Determine requested container size (allow for '%|k|K|m|M|g|G' suffix):
case "${CNTSIZE: -1}" in
"%") CNTSIZE="$(( $PARTFREE * ${CNTSIZE%\%} / 100 ))" ;;
"k") CNTSIZE="$(( ${CNTSIZE%k} / 1024 ))" ;;
"K") CNTSIZE="$(( ${CNTSIZE%K} / 1024 ))" ;;
"m") CNTSIZE="${CNTSIZE%m}" ;;
"M") CNTSIZE="${CNTSIZE%M}" ;;
"g") CNTSIZE="$(( ${CNTSIZE%g} * 1024 ))" ;;
"G") CNTSIZE="$(( ${CNTSIZE%G} * 1024 ))" ;;
*) ;;
esac
if [ $CNTSIZE -le 0 ]; then
echo "*** Container size must be larger than ZERO!"
echo "*** Check your '-c' commandline parameter."
exit 1
elif [ $CNTSIZE -ge $PARTFREE ]; then
echo "*** Not enough free space for container file!"
echo "*** Check your '-c' commandline parameter."
exit 1
fi
echo "--- Creating ${CNTSIZE} MB container file using 'dd if=/dev/urandom', patience please..."
mkdir -p $USBMNT/$(dirname "${CNTBASE}")
CNTFILE="${CNTBASE}.img"
# Create a sparse file (not allocating any space yet):
dd of=$USBMNT/${CNTFILE} bs=1M count=0 seek=$CNTSIZE
# Setup a loopback device that we can use with cryptsetup:
LODEV=$(losetup -f)
losetup $LODEV $USBMNT/${CNTFILE}
if [ "${CNTENCR}" = "luks" ]; then
# Format the loop device with LUKS:
echo "--- Encrypting the container file with LUKS; enter 'YES' and a passphrase..."
until cryptsetup -y luksFormat $LODEV ; do
echo ">>> Did you type two different passphrases?"
read -p ">>> Press [ENTER] to try again or Ctrl-C to abort ..." REPLY
done
# Unlock the LUKS encrypted container:
echo "--- Unlocking the LUKS container requires your passphrase again..."
until cryptsetup luksOpen $LODEV $(basename ${CNTBASE}) ; do
echo ">>> Did you type an incorrect passphrases?"
read -p ">>> Press [ENTER] to try again or Ctrl-C to abort ..." REPLY
done
CNTDEV=/dev/mapper/$(basename ${CNTBASE})
# Now we allocate blocks for the LUKS device. We write encrypted zeroes,
# so that the file looks randomly filled from the outside.
# Take care not to write more bytes than the internal size of the container:
CNTIS=$(( $(lsblk -b -n -o SIZE $(readlink -f ${CNTDEV})) / 512))
dd if=/dev/zero of=${CNTDEV} bs=512 count=${CNTIS} || true
else
CNTDEV=$LODEV
# Un-encrypted container files remain sparse.
fi
# Format the now available block device with a linux fs:
mkfs.ext4 ${CNTDEV}
# Tune the ext4 filesystem:
tune2fs -m 0 -c 0 -i 0 ${CNTDEV}
if [ "${CNTUSED}" != "persistence" ]; then
# Create a mount point for the unlocked container:
CNTMNT=$(mktemp -d -p /mnt -t aliencnt.XXXXXX)
if [ ! -d $CNTMNT ]; then
echo "*** Failed to create temporary mount point for the LUKS container!"
cleanup
exit 1
else
chmod 711 $CNTMNT
fi
# Copy the original /home (or whatever mount) content into the container:
echo "--- Copying '${CNTUSED}' from LiveOS to container..."
HOMESRC=$(find ${USBMNT} -name "0099-slackware_zzzconf*" |tail -1)
mount ${CNTDEV} ${CNTMNT}
unsquashfs -n -d ${CNTMNT}/temp ${HOMESRC} ${CNTUSED}
mv ${CNTMNT}/temp/${CNTUSED}/* ${CNTMNT}/
rm -rf ${CNTMNT}/temp
umount ${CNTDEV}
fi
# Don't forget to clean up after ourselves:
if [ "${CNTENCR}" = "luks" ]; then
cryptsetup luksClose $(basename ${CNTBASE})
fi
losetup -d ${LODEV} || true
} # End of create_container() {
#
# -- end of function definitions --
#
# Parse the commandline parameters:
if [ -z "$1" ]; then
showhelp
exit 1
fi
while [ ! -z "$1" ]; do
case $1 in
-c|--crypt)
HLUKSSIZE="$2"
DOLUKS=1
# Needs unsquashfs to extract the /home
REQTOOLS="${REQTOOLS} unsquashfs zstd"
shift 2
;;
-d|--devices)
show_devices
exit
;;
-f|--force)
FORCE=1
shift
;;
-h|--help)
showhelp
exit
;;
-i|--infile)
SLISO="$(cd $(dirname $2); pwd)/$(basename $2)"
shift 2
;;
-l|--lukshome)
SLHOME="$2"
shift 2
;;
-o|--outdev)
TARGET="$2"
shift 2
;;
-p|--persistence)
PERSISTENCE="$2"
shift 2
;;
-r|--refresh)
REFRESH=1
shift
;;
-s|--scan)
SCAN=1
shift
;;
-u|--unattended)
UNATTENDED=1
shift
;;
-v|--verbose)
VERBOSE=1
shift
;;
-w|--wait)
WAIT="$2"
shift 2
;;
-y|--layout)
LAYOUT="$2"
shift 2
;;
-C|--cryptpersistfile)
DOLUKS=1
PLUKSSIZE="$2"
PERSISTTYPE="file"
shift 2
;;
-P|--persistfile)
PERSISTTYPE="file"
shift
;;
*)
echo "*** Unknown parameter '$1'!"
exit 1
;;
esac
done
# Before we start:
if [ "$(id -u)" != "0" -a $FORCE -eq 0 ]; then
echo "*** You need to be root to run $(basename $0)."
exit 1
fi
# More sanity checks:
if [ -z "$SLISO" ]; then
echo "*** You must specify the Live ISO filename (option '-i')!"
exit 1
fi
# Either provide a block device, or else scan for a block device:
if [ -z "$TARGET" ]; then
if [ $SCAN -eq 1 ]; then
echo "-- Waiting ${SCANWAIT} seconds for a USB stick to be inserted..."
TARGET=$(scan_devices)
if [ -z "$TARGET" ]; then
echo "*** No new USB device detected during $SCANWAIT seconds scan."
exit 1
else
TARGET="/dev/${TARGET}"
fi
else
echo "*** You must specify the Live USB devicename (option '-o')!"
exit 1
fi
elif [ $SCAN -eq 1 ]; then
echo "*** You can not use options '-o' and '-s' at the same time!"
exit 1
fi
if [ $FORCE -eq 0 -a ! -f "$SLISO" ]; then
echo "*** This is not a useable file: '$SLISO' !"
exit 1
fi
if [ $FORCE -eq 0 ]; then
if [ ! -e /sys/block/$(basename $TARGET) ]; then
echo "*** Not a block device: '$TARGET' !"
show_devices
exit 1
elif lsblk -l $TARGET |grep -w $(basename $TARGET) |grep -wq part ; then
echo "*** You need to point to the storage device itself, not a partition ($TARGET)!"
show_devices
exit 1
fi
fi
# Are all the required not-so-common add-on tools present?
PROG_MISSING=""
for PROGN in ${REQTOOLS} ; do
if ! which $PROGN 1>/dev/null 2>/dev/null ; then
PROG_MISSING="${PROG_MISSING}-- $PROGN\n"
fi
done
if [ ! -z "$PROG_MISSING" ] ; then
echo "-- Required program(s) not found in search path '$PATH'!"
echo -e ${PROG_MISSING}
if echo ${PROG_MISSING} |grep -wq zstd ; then
echo "-- Note that the 'zstd' program is missing which means"
echo "-- unsquashfs is not linking against it."
echo "-- Install the zstd and squashf-stools packages for zstd support."
fi
echo "-- Exiting."
exit 1
fi
# Retrieve the version information from the ISO:
VERSION=$(isoinfo -d -i "${SLISO}" 2>/dev/null |grep Application |cut -d: -f2-)
if [ $REFRESH -eq 0 ]; then
# We are creating a USB stick from scratch,
# i.e. not refreshing the Live content.
# Confirm wipe:
cat <<EOT
#
# We are going to format this device (erase all data) - '$TARGET':
EOT
else
# We are refreshing the Live content.
# Confirm refresh:
cat <<EOT
#
# We are going to refresh the Live OS on this device with '$VERSION'.
# Target is - '$TARGET':
EOT
fi
# Continue with the common text message:
cat <<EOT
# ---------------------------------------------------------------------------
# Vendor : $(cat /sys/block/$(basename $TARGET)/device/vendor 2>/dev/null)
# Model : $(cat /sys/block/$(basename $TARGET)/device/model 2>/dev/null)
# Size : $(( $(cat /sys/block/$(basename $TARGET)/size) / 2048)) MB
# ---------------------------------------------------------------------------
#
# FDISK OUTPUT:
EOT
echo q |gdisk -l $TARGET 2>/dev/null | \
while read LINE ; do echo "# $LINE" ; done
if [ $UNATTENDED -eq 0 ]; then
cat <<EOT
*** ***
*** If this is the wrong drive, then press CONTROL-C now! ***
*** ***
EOT
read -p "Or press ENTER to continue: " JUNK
# OK... the user was sure about the drive...
fi
if [ $REFRESH -eq 0 ]; then
# Continue with the wipe/partitioning/formatting.
# Get the LABEL used for the ISO:
LIVELABEL=$(blkid -s LABEL -o value "${SLISO}")
# Use sgdisk to wipe and then setup the USB device:
# - 1 MB BIOS boot partition
# - 100 MB EFI system partition
# - Let Slackware have the rest
# - Make the Linux partition "legacy BIOS bootable"
# Make sure that there is no MBR nor a partition table anymore:
dd if=/dev/zero of=$TARGET bs=512 count=1 conv=notrunc
# We have to use wipefs before sgdisk or else traces of an old 'cp' or 'dd'
# of a Live ISO image to the device will not be erased.
# The sgdisk wipe command is allowed to have non-zero exit code:
wipefs -af $TARGET
sgdisk -og $TARGET || true
# After the wipe, get the value of the last usable sector:
ENDSECT=$(sgdisk -E $TARGET)
# Calculate partition layout in MB.
# User may specify custom non-zero sizes, also for keeping some free space:
if [ -z "$LAYOUT" ]; then LAYOUT=${DEF_LAYOUT}; fi
# Let's first determine whether the user wanted space for a 4th partition:
LP4=$(echo $LAYOUT |cut -d, -f4)
if [ -z "$LP4" ]; then LP4=$(echo $DEF_LAYOUT |cut -d, -f4) ; fi
LP1=$(echo $LAYOUT |cut -d, -f1)
if [ -z "$LP1" ]; then LP1=$(echo $DEF_LAYOUT |cut -d, -f1) ; fi
LP1_START=2048
LP1_END=$(( ${LP1_START} + ( ${LP1} *2048 ) - 1 ))
LP2=$(echo $LAYOUT |cut -d, -f2)
if [ -z "$LP2" ]; then LP2=$(echo $DEF_LAYOUT |cut -d, -f2) ; fi
LP2_START=$(( ${LP1_END} + 1 ))
LP2_END=$(( ${LP2_START} + ( $LP2 *2048 ) - 1 ))
LP3=$(echo $LAYOUT |cut -d, -f3)
if [ -z "$LP3" ]; then LP3=$(echo $DEF_LAYOUT |cut -d, -f3) ; fi
LP3_START=$(( ${LP2_END} + 1 ))
# The end of partition 3 depends on both values of LP3 and LP4:
if [ -n "${LP4}" ] && [ ${LP4} -gt 0 ]; then
LP3_END=$(( $ENDSECT - ( $LP4 * 2048 ) -1 ))
elif [ -n "${LP3}" ] && [ ${LP3} -gt 0 ]; then
LP3_END=$(( ${LP3_START} + ( $LP3 *2048 ) - 1 ))
else
# Give all remaining space to partition 3:
LP3_END=0
fi
# END calculating partition layout in MB.
# Setup the disk partitions:
sgdisk \
-n 1:${LP1_START}:${LP1_END} -c 1:"BIOS Boot Partition" -t 1:ef02 \
-n 2:${LP2_START}:${LP2_END} -c 2:"EFI System Partition" -t 2:ef00 \
-n 3:${LP3_START}:${LP3_END} -c 3:"Slackware Linux" -t 3:8300 \
$TARGET
sgdisk -A 3:set:2 $TARGET
# Show what we did to the USB stick:
sgdisk -p -A 3:show $TARGET
# Determine partition names independently of storage architecture:
TARGETP1=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]1$')
TARGETP2=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]2$')
TARGETP3=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]3$')
# Create filesystems:
# Not enough clusters for a 32 bit FAT:
mkdosfs -s 2 -n "DOS" ${TARGETP1}
mkdosfs -F32 -s 2 -n "EFI" ${TARGETP2}
# KDE tends to automount.. so try an umount:
if mount |grep -qw ${TARGETP3} ; then
umount ${TARGETP3} || true
fi
# http://www.syslinux.org/wiki/index.php?title=Filesystem
# As of Syslinux 6.03, "pure 64-bits" compression/encryption is not supported.
# Modern mke2fs creates file systems with the metadata_csum and 64bit
# features enabled by default.
# Explicitly disable 64bit feature in the mke2fs command with '-O ^64bit';
# otherwise, the syslinux bootloader (>= 6.03) will fail.
# Note: older 32bit OS-es will trip over the '^64bit' feature so be gentle.
mkfs.ext4 -F -F -L "${LIVELABEL}" ${TARGETP3}
if ! tune2fs -O ^64bit ${TARGETP3} 1>/dev/null 2>/dev/null ; then
FEAT_64BIT=""
else
FEAT_64BIT="-O ^64bit"
fi
tune2fs -c 0 -i 0 -m 0 ${FEAT_64BIT} ${TARGETP3}
else
# Determine partition names independently of storage architecture:
TARGETP1=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]1$')
TARGETP2=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]2$')
TARGETP3=$(fdisk -l $TARGET |grep ^$TARGET |cut -d' ' -f1 |grep -E '[^0-9]3$')
fi # End [ $REFRESH -eq 0 ]
# Create temporary mount points for the ISO file and USB device:
mkdir -p /mnt
# ISO mount:
ISOMNT=$(mktemp -d -p /mnt -t alieniso.XXXXXX)
if [ ! -d $ISOMNT ]; then
echo "*** Failed to create a temporary mount point for the ISO!"
cleanup
exit 1
else
chmod 711 $ISOMNT
fi
# USB mounts:
USBMNT=$(mktemp -d -p /mnt -t alienusb.XXXXXX)
if [ ! -d $USBMNT ]; then
echo "*** Failed to create a temporary mount point for the USB device!"
cleanup
exit 1
else
chmod 711 $USBMNT
fi
US2MNT=$(mktemp -d -p /mnt -t alienus2.XXXXXX)
if [ ! -d $US2MNT ]; then
echo "*** Failed to create a temporary mount point for the USB device!"
cleanup
exit 1
else
chmod 711 $US2MNT
fi
# Mount the Linux partition:
mount -t auto ${TARGETP3} ${USBMNT}
# Loop-mount the ISO (or 1st partition if this is a hybrid ISO):
mount -o loop "${SLISO}" ${ISOMNT}
# Find out if the ISO contains an EFI bootloader and use it:
if [ ! -f ${ISOMNT}/EFI/BOOT/boot*.efi ]; then
EFIBOOT=0
echo "-- Note: UEFI boot file 'bootx64.efi' or 'bootia32.efi' not found on ISO."
echo "-- UEFI boot will not be supported"
else
EFIBOOT=1
fi
if [ $REFRESH -eq 0 ]; then
# Collect data from the ISO initrd:
read_initrd ${ISOMNT}/boot/initrd.img
else
# Collect data from the USB initrd:
read_initrd ${USBMNT}/boot/initrd.img
# Display the old Live version:
OLDVERSION="$(cat ${USBMNT}/.isoversion 2>/dev/null)"
if [ -n "${OLDVERSION}" -a -n "${VERSION}" ]; then
echo "--- Refreshing Live OS on USB (${OLDVERSION}) to '${VERSION}'."
fi
fi
# Copy the ISO content into the USB Linux partition:
echo "--- Copying files from ISO to USB... takes some time."
if [ $VERBOSE -eq 1 ]; then
# Show verbose progress:
rsync -rlptD -v --progress --exclude=EFI ${ISOMNT}/* ${USBMNT}/
elif [ -z "$(rsync --info=progress2 2>&1 |grep "unknown option")" ]; then
# Use recent rsync to display some progress because this can take _long_ :
rsync -rlptD --no-inc-recursive --info=progress2 --exclude=EFI \
${ISOMNT}/* ${USBMNT}/
else
# Remain silent if we have an older rsync:
rsync -rlptD --exclude=EFI ${ISOMNT}/* ${USBMNT}/
fi
if [ $REFRESH -eq 1 ]; then
# Clean out old Live system data:
echo "--- Cleaning out old Live system data."
LIVEMAIN="$(echo $(find ${ISOMNT} -name "0099*" |tail -1) |rev |cut -d/ -f3 |rev)"
rsync -rlptD --delete \
${ISOMNT}/${LIVEMAIN}/system/ ${USBMNT}/${LIVEMAIN}/system/
if [ -f ${USBMNT}/boot/extlinux/ldlinux.sys ]; then
chattr -i ${USBMNT}/boot/extlinux/ldlinux.sys 2>/dev/null
fi
rsync -rlptD --delete \
${ISOMNT}/boot/ ${USBMNT}/boot/
fi
# Write down the version of the ISO image:
if [ -n "$VERSION" ]; then
echo "$VERSION" > ${USBMNT}/.isoversion
fi
if [ -n "${HLUKSSIZE}" ]; then
# Create LUKS container file for /home:
create_container ${TARGETP3} ${HLUKSSIZE} ${SLHOME} luks /home
LUKSHOME=${CNTFILE}
fi
# Update the initrd with regard to USB wait time, persistence and LUKS.
# If this is a refresh and anything changed to persistence, then the
# variable $PERSISTENCE will have the correct value when exing this function:
# If you want to move your LUKS home containerfile you'll have to do that
# manually - not a supported option for now.
update_initrd ${USBMNT}/boot/initrd.img
if [ $REFRESH -eq 1 ]; then
# Determine what we need to do with persistence if this is a refresh.
if [ "${PERSISTENCE}" != "${OLDPERSISTENCE}" ]; then
# The user specified a nonstandard persistence, so move the old one first;
# hide any errors if it did not *yet* exist:
mkdir -p ${USBMNT}/$(dirname ${PERSISTENCE})
mv ${USBMNT}/${OLDPERSISTENCE}.img ${USBMNT}/${PERSISTENCE}.img 2>/dev/null
mv ${USBMNT}/${OLDPERSISTENCE} ${USBMNT}/${PERSISTENCE} 2>/dev/null
fi
if [ -f ${USBMNT}/${PERSISTENCE}.img ]; then
# If a persistence container exists, we re-use it:
PERSISTTYPE="file"
if cryptsetup isLuks ${USBMNT}/${PERSISTENCE}.img ; then
# If the persistence file is LUKS encrypted we need to record its size:
PLUKSSIZE=$(( $(du -sk $USBMNT/${PERSISTENCE}.img |tr '\t' ' ' |cut -f1 -d' ') / 1024 ))
fi
elif [ -d ${USBMNT}/${PERSISTENCE} -a "${PERSISTTYPE}" = "file" ]; then
# A persistence directory exists but the user wants a container now;
# so we will delete the persistence directory and create a container file
# (sorry persistent data will not be migrated):
rm -rf ${USBMNT}/${PERSISTENCE}
fi
fi
if [ "${PERSISTTYPE}" = "dir" ]; then
# Create persistence directory:
mkdir -p ${USBMNT}/${PERSISTENCE}
elif [ "${PERSISTTYPE}" = "file" ]; then
# Create container file for persistent storage.
# If it is not going to be LUKS encrypted, we create a sparse file
# that will at most eat up 90% of free space. Sparse means, the actual
# block allocation will start small and grows as more changes are written.
# Note: the word "persistence" below is a keyword for create_container:
if [ -z "${PLUKSSIZE}" ]; then
# Un-encrypted container:
create_container ${TARGETP3} 90% ${PERSISTENCE} none persistence
else
# LUKS-encrypted container:
create_container ${TARGETP3} ${PLUKSSIZE} ${PERSISTENCE} luks persistence
fi
else
echo "*** Unknown persistence type '${PERSISTTYPE}'!"
cleanup
exit 1
fi
# Use extlinux to make the USB device bootable:
echo "--- Making the USB drive '$TARGET' bootable using extlinux..."
mv ${USBMNT}/boot/syslinux ${USBMNT}/boot/extlinux
mv ${USBMNT}/boot/extlinux/isolinux.cfg ${USBMNT}/boot/extlinux/extlinux.conf
rm -f ${USBMNT}/boot/extlinux/isolinux.*
if [ -f "$SYSLXLOC"/vesamenu.c32 ]; then
# We will use our own copy only as a fallback,
# because it is better to use the version that comes with syslinux:
cp -a ${SYSLXLOC}/vesamenu.c32 ${USBMNT}/boot/extlinux/
fi
extlinux --install ${USBMNT}/boot/extlinux
if [ $EFIBOOT -eq 1 ]; then
# Mount the EFI partition and copy /EFI as well as /boot directories into it:
mount -t vfat -o shortname=mixed ${TARGETP2} ${US2MNT}
mkdir -p ${US2MNT}/EFI/BOOT
rsync -rlptD ${ISOMNT}/EFI/BOOT/* ${US2MNT}/EFI/BOOT/
mkdir -p ${USBMNT}/boot
echo "--- Copying EFI boot files from ISO to USB."
if [ $VERBOSE -eq 1 ]; then
rsync -rlptD -v ${ISOMNT}/boot/* ${US2MNT}/boot/
else
rsync -rlptD ${ISOMNT}/boot/* ${US2MNT}/boot/
fi
if [ $REFRESH -eq 1 ]; then
# Clean out old Live system data:
echo "--- Cleaning out old Live system data."
rsync -rlptD --delete \
${ISOMNT}/EFI/BOOT/ ${US2MNT}/EFI/BOOT/
rsync -rlptD --delete \
${ISOMNT}/boot/ ${US2MNT}/boot/
fi
# Copy the modified initrd over from the Linux partition:
cat ${USBMNT}/boot/initrd.img > ${US2MNT}/boot/initrd.img
sync
fi
# No longer needed; umount the USB partitions so we can write a new MBR:
if mount |grep -qw ${USBMNT} ; then umount ${USBMNT} ; fi
if mount |grep -qw ${US2MNT} ; then umount ${US2MNT} ; fi
# Install a GPT compatible MBR record:
if [ -n "${GPTMBRBIN}" ]; then
if [ -f ${GPTMBRBIN} ]; then
cat ${GPTMBRBIN} > ${TARGET}
fi
elif [ -f ${ISOMNT}/boot/syslinux/gptmbr.bin ]; then
cat ${ISOMNT}/boot/syslinux/gptmbr.bin > ${TARGET}
else
echo "*** Failed to make USB device bootable - 'gptmbr.bin' not found!"
cleanup
exit 1
fi
# Unmount/remove stuff:
cleanup
# THE END
