#!/bin/bash
# $Id: iso2usb.sh,v 1.6 2015/11/29 15:07:35 root Exp root $
#
# Copyright 2015, 2016 Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Be careful:
set -e
# Set to '1' if you want to ignore all warnings:
FORCE=0
# By default, we use 'persistence' as the name of the persistence directory,
# or 'persistence.img' as the name of the persistence container:
PERSISTENCE="persistence"
# Default persistence type is a directory:
PERSISTTYPE="dir"
# Set to '1' if the script should not ask any questions:
UNATTENDED=0
# By default do not show file operations in detail:
VERBOSE=0
# Seconds to add to the initrd as wait-for-root value:
WAIT=5
# No LUKS encryption by default:
DOLUKS=0
# Initialize more variables:
CNTDEV=""
CNTFILE=""
LUKSHOME=""
LODEV=""
# Define ahead of time, so that cleanup knows about them:
IMGDIR=""
EFIMNT=""
ISOMNT=""
CNTMNT=""
USBMNT=""
#
# -- function definitions --
#
# Clean up in case of failure:
cleanup() {
# Clean up by unmounting our loopmounts, deleting tempfiles:
echo "--- Cleaning up the staging area..."
# During cleanup, do not abort due to non-zero exit code:
set +e
sync
if [ $DOLUKS -eq 1 ]; then
# In case of failure, only the most recent device should still be open:
if mount |grep -q ${CNTDEV} ; then
umount -f ${CNTDEV}
cryptsetup luksClose ${CNTBASE}
losetup -d ${LODEV}
fi
fi
[ -n "${EFIMNT}" ] && ( /sbin/umount -f ${EFIMNT} 2>/dev/null; rmdir $EFIMNT )
[ -n "${ISOMNT}" ] && ( /sbin/umount -f ${ISOMNT} 2>/dev/null; rmdir $ISOMNT )
[ -n "${CNTMNT}" ] && ( /sbin/umount -f ${CNTMNT} 2>/dev/null; rmdir $CNTMNT )
[ -n "${USBMNT}" ] && ( /sbin/umount -f ${USBMNT} 2>/dev/null; rmdir $USBMNT )
[ -n "${IMGDIR}" ] && ( rm -rf $IMGDIR )
set -e
}
trap 'echo "*** $0 FAILED at line $LINENO ***"; cleanup; exit 1' ERR INT TERM
showhelp() {
cat <<EOT
#
# Purpose: to transfer the content of Slackware's Live ISO image
# to a standard USB thumb drive (which will be formatted and wiped!)
# and thus create a Slackware Live USB media.
#
# Your USB thumb drive may contain data!
# This data will be *erased* !
#
# $(basename $0) accepts the following parameters:
# -c|--crypt size|perc Add LUKS encrypted /home ; parameter is the
# requested size of the container in kB, MB, GB,
# or as a percentage of free space.
# Examples: '-c 125M', '-c 1.3G', '-c 20%'.
# -f|--force Ignore most warnings (except the back-out).
# -h|--help This help.
# -i|--infile <filename> Full path to the ISO image file.
# -o|--outdev <filename> The device name of your USB drive.
# -p|--persistence <dirname> Custom name of the 'persistence' directory.
# -u|--unattended Do not ask any questions.
# -v|--verbose Show verbose messages.
# -w|--wait<number> Add <number> seconds wait time to initialize USB.
# -C|--cryptpersistfile size|perc
# Use a LUKS-encrypted 'persistence' file instead
# of a directory (for use on FAT filesystem).
# -P|--persistfile Use a 'persistence' container file instead of
# a directory (for use on FAT filesystem).
#
# Examples:
#
# $(basename $0) -i ~/download/slackware64-live-14.2.iso -o /dev/sdX
# $(basename $0) -i slackware64-live-xfce-current.iso -o /dev/sdX -c 750M -w 15
#
EOT
}
# Add longer USB WAIT to the initrd:
update_initrd() {
IMGFILE="$1"
# USB boot medium needs a few seconds boot delay else the overlay will fail.
# Check if we need to update the wait-for-root file in the initrd:
OLDWAIT=$(gunzip -cd ${IMGFILE} |cpio -i --to-stdout wait-for-root 2>/dev/null)
if [ "$OLDWAIT" = "$WAIT" -a $DOLUKS -eq 0 ]; then
return
fi
if [ -z "$IMGDIR" ]; then
# Create a temporary extraction directory for the initrd:
mkdir -p /mnt
IMGDIR=$(mktemp -d -p /mnt -t alienimg.XXXXXX)
if [ ! -d $IMGDIR ]; then
echo "*** Failed to create a temporary extraction directory for the initrd!"
exit 1
fi
fi
chmod 711 $IMGDIR
echo "--- Extracting Slackware initrd and adding rootdelay for USB..."
cd ${IMGDIR}
gunzip -cd ${IMGFILE} \
| cpio -i -d -H newc --no-absolute-filenames
echo "--- Updating 'waitforroot' time from '$OLDWAIT' to '$WAIT':"
echo ${WAIT} > wait-for-root
if [ $DOLUKS -eq 1 -a -n "${LUKSHOME}" ]; then
if ! grep -q ${LUKSHOME} luksdev ; then
echo "--- Adding '${LUKSHOME}' as LUKS /home:"
echo "${LUKSHOME}" >> luksdev
fi
fi
echo "--- Compressing the initrd image again:"
chmod 0755 ${IMGDIR}
find . |cpio -o -H newc |gzip > ${IMGFILE}
cd - 2>/dev/null
rm -rf $IMGDIR/*
} # End of update_initrd()
# Create a container file in the empty space of the partition
create_container() {
CNTPART=$1
CNTSIZE=$2
CNTBASE=$3
CNTENCR=$4 # 'none' or 'luks'
CNTUSED=$5 # '/home' or 'persistence'
# Determine size of the target partition (in MB), and the free space:
PARTSIZE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f2)
PARTSIZE=${PARTSIZE%M}
PARTFREE=$(df -P -BM ${CNTPART} |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
PARTFREE=${PARTFREE%M}
if [ $PARTFREE -lt 10 ]; then
echo "** Free space on USB partition is less than 10 MB;"
echo "** Not creating a container file!"
exit 1
fi
# Determine requested container size (allow for '%|k|K|m|M|g|G' suffix):
case "${CNTSIZE: -1}" in
"%") CNTSIZE="$(( $PARTFREE * ${CNTSIZE%\%} / 100 ))" ;;
"k") CNTSIZE="$(( ${CNTSIZE%k} / 1024 ))" ;;
"K") CNTSIZE="$(( ${CNTSIZE%K} / 1024 ))" ;;
"m") CNTSIZE="${CNTSIZE%m}" ;;
"M") CNTSIZE="${CNTSIZE%M}" ;;
"g") CNTSIZE="$(( ${CNTSIZE%g} * 1024 ))" ;;
"G") CNTSIZE="$(( ${CNTSIZE%G} * 1024 ))" ;;
*) ;;
esac
if [ $CNTSIZE -le 0 ]; then
echo "** Container size must be larger than ZERO!"
echo "** Check your '-c' commandline parameter."
exit 1
elif [ $CNTSIZE -ge $PARTFREE ]; then
echo "** Not enough free space for container file!"
echo "** Check your '-c' commandline parameter."
exit 1
fi
# Create an empty container file (re-use previously created one):
if [ -f $USBMNT/${CNTBASE}.img ]; then
CNTFILE="${CNTBASE}.img"
CNTSIZE=$(( $(du -sk ${CNTFILE}) / 1024 ))
if [ $UNATTENDED -eq 0 ]; then
echo "*** File '${CNTFILE}' already exists (size ${CNTSIZE} MB). ***"
echo "*** If you do not want to re-use it for '$CNTUSED', ***"
echo "*** then press CONTROL-C now and rename that file! ***"
read -p "Else press ENTER to continue: " JUNK
# OK... the user was sure about the file...
fi
else
echo "--- Creating ${CNTSIZE} MB container file using 'dd if=/dev/urandom', patience please..."
CNTFILE="${CNTBASE}.img"
# Create a sparse file (not allocating any space yet):
dd of=$USBMNT/${CNTFILE} bs=1M count=0 seek=$CNTSIZE
fi
# Setup a loopback device that we can use with cryptsetup:
LODEV=$(losetup -f)
losetup $LODEV $USBMNT/${CNTFILE}
if [ "${CNTENCR}" = "luks" ]; then
# Format the loop device with LUKS:
echo "--- Encrypting the container file with LUKS; enter 'YES' and a passphrase..."
cryptsetup -y luksFormat $LODEV
# Unlock the LUKS encrypted container:
echo "--- Unlocking the LUKS container requires your passphrase again..."
cryptsetup luksOpen $LODEV ${CNTBASE}
CNTDEV=/dev/mapper/${CNTBASE}
# Now we allocate blocks for the LUKS device. We write encrypted zeroes,
# so that the file looks randomly filled from the outside.
# Take care not to write more bytes than the internal size of the container:
CNTIS=$(( $(lsblk -b -n -o SIZE $(readlink -f ${CNTDEV})) / 512))
dd if=/dev/zero of=${CNTDEV} bs=512 count=${CNTIS} || true
else
CNTDEV=$LODEV
# Un-encrypted container files remain sparse.
fi
# Format the now available block device with a linux fs:
mkfs.ext4 ${CNTDEV}
# Tune the ext4 filesystem:
tune2fs -m 0 -c 0 -i 0 ${CNTDEV}
if [ "${CNTUSED}" != "persistence" ]; then
# Create a mount point for the unlocked container:
CNTMNT=$(mktemp -d -p /mnt -t aliencnt.XXXXXX)
if [ ! -d $CNTMNT ]; then
echo "*** Failed to create temporary mount point for the LUKS container!"
cleanup
exit 1
else
chmod 711 $CNTMNT
fi
# Copy the original /home (or whatever mount) content into the container:
echo "--- Copying '${CNTUSED}' from LiveOS to container..."
HOMESRC=$(find ${USBMNT} -name "0099-slackware_zzzconf*" |tail -1)
mount ${CNTDEV} ${CNTMNT}
unsquashfs -n -d ${CNTMNT}/temp ${HOMESRC} ${CNTUSED}
mv ${CNTMNT}/temp/${CNTUSED}/* ${CNTMNT}/
rm -rf ${CNTMNT}/temp
umount ${CNTDEV}
fi
# Don't forget to clean up after ourselves:
if [ "${CNTENCR}" = "luks" ]; then
cryptsetup luksClose ${CNTBASE}
fi
losetup -d ${LODEV} || true
} # End of create_container() {
#
# -- end of function definitions --
#
# Parse the commandline parameters:
if [ -z "$1" ]; then
showhelp
exit 1
fi
while [ ! -z "$1" ]; do
case $1 in
-c|--crypt)
HLUKSSIZE="$2"
DOLUKS=1
shift 2
;;
-f|--force)
FORCE=1
shift
;;
-h|--help)
showhelp
exit
;;
-i|--infile)
SLISO="$(cd $(dirname $2); pwd)/$(basename $2)"
shift 2
;;
-o|--outdev)
TARGET="$2"
shift 2
;;
-p|--persistence)
PERSISTENCE="$2"
shift 2
;;
-u|--unattended)
UNATTENDED=1
shift
;;
-v|--verbose)
VERBOSE=1
RVERBOSE=" -v --progress "
shift
;;
-w|--wait)
WAIT="$2"
shift 2
;;
-C|--cryptpersistfile)
DOLUKS=1
PLUKSSIZE="$2"
PERSISTTYPE="file"
shift 2
;;
-P|--persistfile)
PERSISTTYPE="file"
shift
;;
*)
echo "*** Unknown parameter '$1'!"
exit 1
;;
esac
done
# Before we start:
[ -x /bin/id ] && CMD_ID="/bin/id" || CMD_ID="/usr/bin/id"
if [ "$($CMD_ID -u)" != "0" -a $FORCE -eq 0 ]; then
echo "*** You need to be root to run $(basename $0)."
exit 1
fi
# More sanity checks:
if [ -z "$TARGET" -o -z "$SLISO" ]; then
echo "*** You must specify both the Live ISO filename and the USB devicename!"
exit 1
fi
if [ ! -f $SLISO -a $FORCE -eq 0 ]; then
echo "*** This is not a useable file: '$SLISO' !"
exit 1
fi
if [ ! -b $TARGET -a $FORCE -eq 0 ]; then
echo "*** Not a block device: '$TARGET' !"
exit 1
elif [ "$(echo ${TARGET%[0-9]})" != "$TARGET" -a $FORCE -eq 0 ]; then
echo "*** You need to point to the USB device, not a partition ($TARGET)!"
exit 1
fi
# Are all the required not-so-common add-on tools present?
PROG_MISSING=""
for PROGN in blkid cpio extlinux fdisk gdisk iso-info mkdosfs sgdisk unsquashfs ; do
if ! PATH="/sbin:$PATH" which $PROGN 1>/dev/null 2>/dev/null ; then
PROG_MISSING="${PROG_MISSING}-- $PROGN\n"
fi
done
if [ ! -z "$PROG_MISSING" ] ; then
echo "-- Required program(s) not found in root's PATH!"
echo -e ${PROG_MISSING}
echo "-- Exiting."
exit 1
fi
# Confirm wipe:
cat <<EOT
#
# We are going to format this device (erase all data) - '$TARGET':
# Vendor : $(cat /sys/block/$(basename $TARGET)/device/vendor)
# Model : $(cat /sys/block/$(basename $TARGET)/device/model)
# Size : $(( $(cat /sys/block/$(basename $TARGET)/size) / 2048)) MB
#
# FDISK OUTPUT:
EOT
echo q |/sbin/gdisk -l $TARGET 2>/dev/null | while read LINE ; do echo "# $LINE" ; done
if [ $UNATTENDED -eq 0 ]; then
cat <<EOT
*** ***
*** If this is the wrong drive, then press CONTROL-C now! ***
*** ***
EOT
read -p "Or press ENTER to continue: " JUNK
# OK... the user was sure about the drive...
fi
# Get the LABEL used for the ISO:
LIVELABEL=$(/sbin/blkid -s LABEL -o value ${SLISO})
# Use sgdisk to wipe and then setup the USB device:
# - 1 MB BIOS boot partition
# - 100 MB EFI system partition
# - Let Slackware have the rest
# - Make the Linux partition "legacy BIOS bootable"
# Make sure that there is no MBR nor a partition table anymore:
dd if=/dev/zero of=$TARGET bs=512 count=1 conv=notrunc
# The first sgdisk command is allowed to have non-zero exit code:
/sbin/sgdisk -og $TARGET || true
/sbin/sgdisk \
-n 1:2048:4095 -c 1:"BIOS Boot Partition" -t 1:ef02 \
-n 2:4096:208895 -c 2:"EFI System Partition" -t 2:ef00 \
-n 3:208896:0 -c 3:"Slackware Linux" -t 3:8300 \
$TARGET
/sbin/sgdisk -A 3:set:2 $TARGET
# Show what we did to the USB stick:
/sbin/sgdisk -p -A 3:show $TARGET
# Create filesystems:
# Not enough clusters for a 32 bit FAT:
/sbin/mkdosfs -s 2 -n "DOS" ${TARGET}1
/sbin/mkdosfs -F32 -s 2 -n "EFI" ${TARGET}2
# KDE tends to automount.. so try an umount:
if /sbin/mount |grep -qw ${TARGET}3 ; then /sbin/umount ${TARGET}3 || true ; fi
/sbin/mkfs.ext4 -F -F -L "${LIVELABEL}" -m 0 ${TARGET}3
/sbin/tune2fs -c 0 -i 0 ${TARGET}3
# Create temporary mount points for the ISO file:
mkdir -p /mnt
EFIMNT=$(mktemp -d -p /mnt -t alienefi.XXXXXX)
if [ ! -d $EFIMNT ]; then
echo "*** Failed to create a temporary mount point for the ISO!"
cleanup
exit 1
else
chmod 711 $EFIMNT
fi
ISOMNT=$(mktemp -d -p /mnt -t alieniso.XXXXXX)
if [ ! -d $ISOMNT ]; then
echo "*** Failed to create a temporary mount point for the ISO!"
cleanup
exit 1
else
chmod 711 $ISOMNT
fi
# Find out if the ISO contains an EFI bootloader and use it:
EFIBOOT=0
EFIOFFSET=$(/sbin/fdisk -lu ${SLISO} 2>/dev/null |grep EFI |tr -s ' ' | cut -d' ' -f 2)
if [ -n "$EFIOFFSET" ]; then
# Mount the EFI partition so we can retrieve the EFI bootloader:
/sbin/mount -o loop,offset=$((512*$EFIOFFSET)) ${SLISO} ${EFIMNT}
if [ ! -f ${EFIMNT}/EFI/BOOT/bootx64.efi ]; then
echo "-- Note: UEFI boot file 'bootx64.efi' not found on ISO."
echo "-- UEFI boot will not be supported"
elif [ ! -f ${EFIMNT}/EFI/BOOT/bootia32.efi ]; then
echo "-- Note: UEFI boot file 'bootia32.efi' not found on ISO."
echo "-- 32-bit UEFI boot will not be supported"
else
EFIBOOT=1
fi
fi
# Create a temporary mount point for the USB device:
mkdir -p /mnt
USBMNT=$(mktemp -d -p /mnt -t alienusb.XXXXXX)
if [ ! -d $USBMNT ]; then
echo "*** Failed to create a temporary mount point for the USB device!"
cleanup
exit 1
else
chmod 711 $USBMNT
fi
# Mount the Linux partition:
/sbin/mount -t auto ${TARGET}3 ${USBMNT}
# Loop-mount the ISO (or 1st partition if this is a hybrid ISO):
/sbin/mount -o loop ${SLISO} ${ISOMNT}
# Copy the ISO content into the USB Linux partition:
echo "--- Copying files from ISO to USB... takes some time."
rsync -a ${RVERBOSE} --exclude=EFI ${ISOMNT}/* ${USBMNT}/
# Write down the version of the ISO image:
VERSION=$(iso-info ${SLISO} |grep Application |cut -d: -f2- 2>/dev/null)
if [ -n "$VERSION" ]; then
echo "$VERSION" > ${USBMNT}/.isoversion
fi
if [ $DOLUKS -eq 1 ]; then
# Create LUKS container file:
create_container ${TARGET}3 ${HLUKSSIZE} slhome luks /home
LUKSHOME=${CNTFILE}
fi
# Add more USB WAIT seconds to the initrd:
update_initrd ${USBMNT}/boot/initrd.img
if [ "${PERSISTTYPE}" = "dir" ]; then
# Create persistence directory:
mkdir -p ${USBMNT}/${PERSISTENCE}
elif [ "${PERSISTTYPE}" = "file" ]; then
# Create container file for persistent storage.
# If it is not going to be LUKS encrypted, we create a sparse file
# that will at most eat up 90% of free space. Sparse means, the actual
# block allocation will start small and grows as more changes are written.
# Note: the word "persistence" below is a keyword for create_container:
if [ -z "${PLUKSSIZE}" ]; then
# Un-encrypted container:
create_container ${TARGET}3 90% ${PERSISTENCE} none persistence
else
# LUKS-encrypted container:
create_container ${TARGET}3 ${PLUKSSIZE} ${PERSISTENCE} luks persistence
fi
else
echo "*** Unknown persistence type '${PERSISTTYPE}'!"
cleanup
exit 1
fi
# Use extlinux to make the USB device bootable:
echo "--- Making the USB drive '$TARGET' bootable using extlinux..."
mv ${USBMNT}/boot/syslinux ${USBMNT}/boot/extlinux
mv ${USBMNT}/boot/extlinux/isolinux.cfg ${USBMNT}/boot/extlinux/extlinux.conf
rm ${USBMNT}/boot/extlinux/isolinux.*
/sbin/extlinux --install ${USBMNT}/boot/extlinux
# No longer needed:
/sbin/umount ${USBMNT}
if [ $EFIBOOT -eq 1 ]; then
# Mount the EFI partition and copy /EFI as well as /boot directories into it:
/sbin/mount -t vfat -o shortname=mixed ${TARGET}2 ${USBMNT}
mkdir -p ${USBMNT}/EFI/BOOT
rsync -rlptD ${ISOMNT}/EFI/BOOT/* ${USBMNT}/EFI/BOOT/
mkdir -p ${USBMNT}/boot
rsync -rlptD ${ISOMNT}/boot/* ${USBMNT}/boot/
# Add more USB WAIT seconds to the initrd:
update_initrd ${USBMNT}/boot/initrd.img
fi
# No longer needed:
/sbin/umount ${USBMNT}
/sbin/umount ${EFIMNT}
# Unmount/remove stuff:
cleanup
# Install a GPT compatible MBR record:
if [ -f /usr/share/syslinux/gptmbr.bin ]; then
cat /usr/share/syslinux/gptmbr.bin > ${TARGET}
else
echo "*** Failed to make USB device bootable - 'gptmbr.bin' not found!"
cleanup
exit 1
fi
# THE END
