setup2hd fixes and enhancements

DAW configuration is now properly copied
Extracting the Live OS to hard disk is roughly 10 times faster now,
  after abandoning the fancy progress bar and just showing the rsync status.
Use an enhanced Slackware SeTpasswd to add a non-root user and set
   the root password.
Various syntax and logic errors removed.

5 files changed, 66 insertions, 49 deletions

diff --git a/setup2hd/SeTpasswd b/setup2hd/SeTpasswd.tpl
index 4208306..04d7c8c 100644
--- a/setup2hd/SeTpasswd
+++ b/setup2hd/SeTpasswd.tpl
@@ -1,18 +1,39 @@
+#!/bin/sh
 # Liveslak replacement for Slackware's SeTpassword script.
 
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP
+fi
+T_PX="$(cat $TMP/SeTT_PX)"
+
+# Check for root password:
+if [ "$(cat $T_PX/etc/shadow | grep 'root:' | cut -f 2 -d :)" != "" ]; then
+  # Root password has been set, nothing further to be done.
+  exit 0
+fi
+
+# No root password has been set yet, which means no user was created either.
+
 # Set up a user account,
+if [ -r $TMP/SeTlive ]; then
+  # We will only configgure su access when installing a Live OS:
+  SUTEXT="\nYour account will be added to sudoers and suauth."
+else
+  SUTEXT=""
+fi
 dialog --title "@UDISTRO@ (@LIVEDE@) USER CREATION" \
  --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
  --msgbox "You will first get the chance to create your user account, \
-and set its password.\nYour account will be added to sudoers and suauth.\n\n\
-After that, you will be asked to set the root password." 9 55
+and set its password.${SUTEXT}\n\n\
+After that, you will be asked to set the root password." 11 55
 # This will set UFULLNAME, UACCOUNT and USHELL variables:
-SeTuacct 2>&1 1> $TMP/tempresult
+SeTuacct 2>&1 1> $TMP/temppasswd
 if [ $? = 0 ]; then
   # User filled out the form, so let's get the results for
   # UFULLNAME, UACCOUNT, UACCTNR and USHELL:
-  source $TMP/tempresult
-  rm -f $TMP/tempresult
+  source $TMP/temppasswd
+  rm -f $TMP/temppasswd
   # Set a password for the new account:
   UPASS=$(SeTupass $UACCOUNT)
   # Create the account and set the password:
@@ -21,10 +42,7 @@ if [ $? = 0 ]; then
   unset UPASS
 fi # End user creation
 
-# Check for root password:
-if [ "$(cat $T_PX/etc/shadow | grep 'root:' | cut -f 2 -d :)" = "" ]; then
-  # There is no root password yet:
-  UPASS=$(SeTupass root)
-  echo "root:${UPASS}" | chroot ${T_PX} /usr/sbin/chpasswd
-  unset UPASS
-fi
+# Finally, set the root password:
+UPASS=$(SeTupass root)
+echo "root:${UPASS}" | chroot ${T_PX} /usr/sbin/chpasswd
+unset UPASS
diff --git a/setup2hd/SeTuacct.tpl b/setup2hd/SeTuacct.tpl
index 5024f5d..e07564f 100644
--- a/setup2hd/SeTuacct.tpl
+++ b/setup2hd/SeTuacct.tpl
@@ -1,21 +1,21 @@
 #!/bin/sh
-#TMP=/var/log/setup/tmp
-TMP=/tmp
+TMP=/var/log/setup/tmp
 if [ ! -d $TMP ]; then
   mkdir -p $TMP
 fi
+T_PX="$(cat $TMP/SeTT_PX)"
 
 freeuid() {
   # Get the first free UIDNumber after 999:
-  local UIDS=$( cat ${T_PX}/etc/passwd | cut -d: -f3 | sort -n )
-  local UID=999
+  local LUIDS=$( cat ${T_PX}/etc/passwd | cut -d: -f3 | sort -n )
+  local LUID=999
   while true; do
-    UID=$(( $UID + 1))
-    if ! echo $UIDS | grep -F -q -w "$UID"; then
+    LUID=$(( $LUID + 1))
+    if ! echo $LUIDS | grep -F -q -w "$LUID"; then
       break;
     fi
   done
-  echo $UID
+  echo $LUID
 }
 FREEUID="$(freeuid)"
 
@@ -33,14 +33,14 @@ while [ 0 ]; do
       "Logonname:"   2 1 "$UACCOUNT"  2 14 32 0 \
       "UIDNumber:"   3 1 "$UACCTNR"   3 14 12 0 \
       "Login Shell:" 4 1 "$USHELL"    4 14 12 0 \
-    2>&1 1> $TMP/tempresult
+    2>&1 1> $TMP/tempuacct
   iii=0
   declare -a USERATTR
   while read LINE ; do
     USERATTR[$iii]="$LINE"
     iii=$(expr $iii + 1)
-  done < $TMP/tempresult
-  rm -f $TMP/tempresult
+  done < $TMP/tempuacct
+  rm -f $TMP/tempuacct
   UFULLNAME="${USERATTR[0]}"
   UACCOUNT="${USERATTR[1]}"
   UACCTNR="${USERATTR[2]}"
diff --git a/setup2hd/SeTumedia.tpl b/setup2hd/SeTumedia.tpl
index 9a68eaf..f14e37c 100644
--- a/setup2hd/SeTumedia.tpl
+++ b/setup2hd/SeTumedia.tpl
@@ -8,9 +8,9 @@ dialog --backtitle "Select Slackware installation source." \
 --title "SOURCE MEDIA SELECTION" --menu \
 "Please select the media from which to install Slackware Linux:" \
 14 70 7 \
-"1" "Install from NFS (Network File System)" \
-"2" "Install from FTP/HTTP server" \
-"3" "Install from Samba share" \
+"1" "Install Slackware from NFS (Network File System)" \
+"2" "Install Slackware from FTP/HTTP server" \
+"3" "Install Slackware from Samba share" \
 "4" "Install @UDISTRO@ (@LIVEDE@) Live OS to disk" \
 2> $TMP/media
 if [ ! $? = 0 ]; then
diff --git a/setup2hd/SeTupass.tpl b/setup2hd/SeTupass.tpl
index ff662ab..8cbadea 100644
--- a/setup2hd/SeTupass.tpl
+++ b/setup2hd/SeTupass.tpl
@@ -16,14 +16,14 @@ UACCOUNT="$1"
         9 64 0 \
           "Password:"        1 1 "$UPASS1" 1 18 40 0 \
           "Repeat password:" 2 1 "$UPASS2" 2 18 40 0 \
-        2>&1 1> $TMP/tempresult
+        2>&1 1> $TMP/tempupass
       iii=0
       declare -a USERATTR
       while read LINE ; do
         USERATTR[$iii]="$LINE"
         iii=$(expr $iii + 1)
-      done < $TMP/tempresult
-      rm -f $TMP/tempresult
+      done < $TMP/tempupass
+      rm -f $TMP/tempupass
       UPASS1="${USERATTR[0]}"
       UPASS2="${USERATTR[1]}"
       unset USERATTR
diff --git a/setup2hd/setup.liveslak.tpl b/setup2hd/setup.liveslak.tpl
index 5b6e65a..ce99461 100644
--- a/setup2hd/setup.liveslak.tpl
+++ b/setup2hd/setup.liveslak.tpl
@@ -48,13 +48,12 @@ Press ENTER to return to the main menu." 16 68
 
   (
     # Install the Live OS by rsyncing the readonly overlay to the harddisk:
-    rsync -HAXav --whole-file --checksum-choice=none --inplace --progress --no-inc-recursive \
-      /mnt/@LIVEMAIN@fs/ $T_PX/ \
-      | awk '{ if (index($0, "to-chk=") > 0) { split($0, pieces, "to-chk="); split(pieces[2], term, ")"); split(term[1], division, "/"); print (1-(division[1]/division[2]))*100 };  fflush(); }' \
-      | sed --unbuffered 's/^\([0-9]*\).*/\1/'
+    rsync -HAXa --whole-file --checksum-choice=none --inplace \
+      --info=progress2 --no-inc-recursive \
+      /mnt/liveslakfs/ $T_PX/ ; echo DONE \
   ) | dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
-       --title "INSTALLING @UDISTRO@ LIVE (@LIVEDE@) TO DISK" --gauge \
-       "\nProcessing ${TOT_MODS} @CDISTRO@ Live modules ($(( $DU_LIVE/1024 )) MB)" 8 65
+        --title "INSTALLING @UDISTRO@ LIVE (@LIVEDE@) TO DISK" --programbox \
+        "\nProcessing ${TOT_MODS} @CDISTRO@ Live modules ($(( $DU_LIVE/1024 )) MB)" 8 80
 
   #
   # Live OS Post Install routine. If you want, you can override this routine
@@ -69,14 +68,14 @@ Press ENTER to return to the main menu." 16 68
      --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
      --msgbox "You will first get the chance to create your user account, \
 and set its password.\nYour account will be added to sudoers and suauth.\n\n\
-After that, you will be asked to set the root password." 9 55
+After that, you will be asked to set the root password." 11 55
     # This will set UFULLNAME, UACCOUNT, UACCTNR and USHELL variables:
-    SeTuacct 2>&1 1> $TMP/tempresult
+    SeTuacct 2>&1 1> $TMP/uacctresult
     if [ $? = 0 ]; then
       # User filled out the form, so let's get the results for
       # UFULLNAME, UACCOUNT, UACCTNR and USHELL:
-      source $TMP/tempresult
-      rm -f $TMP/tempresult
+      source $TMP/uacctresult
+      rm -f $TMP/uacctresult
       # Set a password for the new account:
       UPASS=$(SeTupass $UACCOUNT)
       # Create the account and set the password:
@@ -116,11 +115,11 @@ EOT
     sleep 1 # It's too fast...
     # Do not overwrite a custom keymap:
     if [ ! -f $T_PX/etc/rc.d/rc.keymap ]; then
-      unsquashfs -f -dest $T_PX \
+      unsquashfs -n -f -dest $T_PX \
         /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
         /etc/rc.d/rc.keymap
     fi
-    unsquashfs -f -dest $T_PX \
+    unsquashfs -n -f -dest $T_PX \
       /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
       /etc/X11/xinit/xinitrc \
       /etc/X11/xdm/liveslak-xdm \
@@ -134,13 +133,13 @@ EOT
       /etc/vconsole.conf
     # Point xdm to the custom /etc/X11/xdm/liveslak-xdm/xdm-config:
     sed -i ${T_PX}/etc/rc.d/rc.4 -e 's,bin/xdm -nodaemon,& -config /etc/X11/xdm/liveslak-xdm/xdm-config,'
-    # Prevent Slackware's SeTconfig from asking redundant questions later on:
-    sed -i ${T_PX}/usr/lib/setup/SeTconfig \
+    # Prevent SeTconfig from asking redundant questions later on:
+    sed -i ${T_PX}/usr/share/@LIVEMAIN@/SeTconfig \
       -e '/.\/var\/log\/setup\/$SCRIPT $T_PX $ROOT_DEVICE/i # Skip stuff that was taken care of by liveslak\nif echo $SCRIPT |grep -E "(make-bootdisk|mouse|setconsolefont|xwmconfig)"; then continue; fi'
 
     # If a user account was created, we restore some of the user customization:
     if [ -n "${UACCOUNT}" ] && [ -d "${T_PX}/home/${UACCOUNT}" ]; then
-      unsquashfs -f -dest $T_PX \
+      unsquashfs -n -f -dest $T_PX \
         /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
         /home/@LIVEUID@/.face \
         /home/@LIVEUID@/.face.icon
@@ -153,7 +152,7 @@ EOT
     # If the Live OS is real-time capable we need to apply that to the install:
     if [ "@LIVEDE@" = "PLASMA5" -o "@LIVEDE@" = "DAW" -o "@LIVEDE@" = "STUDIOWARE" ];
 then
-      unsquashfs -f -dest $T_PX \
+      unsquashfs -n -f -dest $T_PX \
         /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
         /etc/security/limits.d/rt_audio.conf \
         /etc/initscript \
@@ -165,7 +164,7 @@ then
     if [ "@LIVEDE@" = "DAW" ];
 then
       LCLIVEDE=$(echo @LIVEDE@ |tr 'A-Z' 'a-z')
-      unsquashfs -f -dest $T_PX \
+      unsquashfs -n -f -dest $T_PX \
         /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
         /etc/pulse/daemon.conf \
         /etc/xdg/menus/applications-merged/liveslak-daw.menu \
@@ -179,12 +178,12 @@ then
 
       # If a user account was created, we restore DAW user customization:
       if [ -n "${UACCOUNT}" ] && [ -d "${T_PX}/home/${UACCOUNT}" ]; then
-        unsquashfs -f -dest $T_PX \
+        unsquashfs -n -f -dest $T_PX \
           /mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
           /home/@LIVEUID@/.jackdrc \
-          /home/${LIVEUID}/.config/autostart/qjackctl.desktop \
-          /home/${LIVEUID}/.config/rncbc.org/QjackCtl.conf \
-          /home/${LIVEUID}/.config/kscreenlockerrc
+          /home/@LIVEUID@/.config/autostart/qjackctl.desktop \
+          /home/@LIVEUID@/.config/rncbc.org/QjackCtl.conf \
+          /home/@LIVEUID@/.config/kscreenlockerrc
         if [ "@LIVEUID@" != ${UACCOUNT} ]; then
           rsync -a $T_PX/home/@LIVEUID@/ $T_PX/home/${UACCOUNT}/
           rm -rf $T_PX/home/@LIVEUID@