#!/bin/ash # # Copyright 2004 Slackware Linux, Inc., Concord, CA, USA # Copyright 2007, 2008, 2009, 2010, 2012 Patrick J. Volkerding, Sebeka, MN, USA # Copyright 2015, 2016 Eric Hameleers, Eindhoven, NL # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # ################################################################################## # Changelog # 10-Dec-2012 # * Added support for the official Kernel parameters to select root filesystem # type ('rootfstype') and pause before attempting to mount the root filesystem # ('rootdelay'). The original parameters may continue to be used. # 23-Oct-2015 # * Modified for booting as a Live filesystem. ################################################################################## # The ISO creation script will create a filesystem with this label. # Nevertheless, the user may have copied the ISO content to a different device. MEDIALABEL="@MEDIALABEL@" LIVEMAIN="@LIVEMAIN@" MARKER="@MARKER@" PERSISTENCE="@PERSISTENCE@" LIVEMEDIA="" LIVEPATH="" # By default, let the media determine if we can write persistent changes: # However, if we define TORAM=1, we will also set VIRGIN=1 since we want # to avoid anything that writes to disk after we copy the OS to RAM. VIRGIN=0 # If set to '1', existing persistent data will be wiped: WIPE_PERSISTENCE=0 # Used for debugging the init; # Set DEBUG to '1' to enable explicit pauses; '2' enables verbose script exec; # and '4' dumps you into a debug shell right before the switch_root: DEBUG=0 DEBUGV=" " # Masochists can copy the live environment into RAM: TORAM=0 # The default number of loop devices the Live OS will use (if you have # a large number of addon modules, this value may be too low). # Can be changed by the 'maxloops=' boot parameter: MAXLOOPS=96 # By default we do not touch local hard disks (raid, lvm, btrfs): LOCALHD=0 # Usability tweaks: TWEAKS="" # Perhaps we need to blacklist some kernel module(s): BLACKLIST="" # NFS root support: HNMAC="" HNMAC_ALLOWED="YES" INTERFACE="" NFSHOST="" # Max wait time for DHCP client to configure an interface: DHCPWAIT=20 INITRD=$(cat /initrd-name) WAIT=$(cat /wait-for-root) KEYMAP=$(cat /keymap) LUKSVOL=$(cat /luksdev) INIT=/sbin/init PATH="/sbin:/bin:/usr/sbin:/usr/bin" # Mount /proc and /sys: mount -n proc /proc -t proc mount -n sysfs /sys -t sysfs mount -n tmpfs /run -t tmpfs -o mode=0755 if grep devtmpfs /proc/filesystems 1>/dev/null 2>/dev/null ; then DEVTMPFS=1 mount -n devtmpfs /dev -t devtmpfs fi # Parse command line for ARG in $(cat /proc/cmdline); do case $ARG in 0|1|2|3|4|5|6|S|s|single) RUNLEVEL=$ARG ;; blacklist=*) BLACKLIST=$(echo $ARG | cut -f2 -d=) ;; debug) DEBUG=1 ;; debug=*) DEBUG=$(echo $ARG | cut -f2 -d=) DEBUGV="-v" ;; dhcpwait=*) DHCPWAIT=$(echo $ARG | cut -f2 -d=) ;; hostname=*) # generic syntax: hostname=newname[,qualifier] LIVE_HOSTNAME=$(echo $ARG | cut -f2 -d= | cut -f1 -d,) if [ "$(echo $ARG | cut -f2 -d= | cut -f2 -d,)" = "fixed" ]; then Keep hostname fixed i.e. never add a MAC address suffix: HNMAC_ALLOWED="NO" fi ;; init=*) INIT=$(echo $ARG | cut -f2 -d=) ;; kbd=*) KEYMAP=$(echo $ARG | cut -f2 -d=) ;; livemain=*) LIVEMAIN=$(echo $ARG | cut -f2 -d=) ;; livemedia=*) # generic syntax: livemedia=/dev/sdX # ISO syntax: livemedia=/dev/sdX:/path/to/slackwarelive.iso LM=$(echo $ARG | cut -f2 -d=) LIVEMEDIA=$(echo $LM | cut -f1 -d:) LIVEPATH=$(echo $LM | cut -f2 -d:) unset LM ;; livepw=*) LIVEPW=$(echo $ARG | cut -f2 -d=) ;; load=*) LOAD=$(echo $ARG | cut -f2 -d=) ;; locale=*) LOCALE=$(echo $ARG | cut -f2 -d=) ;; localhd) LOCALHD=1 ;; luksvol=*) # Format: luksvol=file1[:/mountpoint1][,file1[:/mountpoint2],...] LUKSVOL=$(echo $ARG | cut -f2 -d=) ;; maxloops=*) MAXLOOPS=$(echo $ARG | cut -f2 -d=) ;; nfsroot=*) # nfsroot=192.168.0.1:/path/to/liveslak NFSHOST=$(echo $ARG | cut -f2 -d= |cut -f1 -d:) NFSPATH=$(echo $ARG | cut -f2 -d= |cut -f2 -d:) ;; nic=*) # nic=::[:ipaddr:netmask[:gateway]] ENET=$(echo $ARG | cut -f2 -d=) ;; noload=*) NOLOAD=$(echo $ARG | cut -f2 -d=) ;; nop) VIRGIN=1 ;; nop=*) if [ "$(echo $ARG | cut -f2 -d=)" = "wipe" ]; then WIPE_PERSISTENCE=1 fi ;; persistence=*) PERSISTENCE=$(echo $ARG | cut -f2 -d=) ;; rescue) RESCUE=1 ;; swap) USE_SWAP=1 ;; rootpw=*) ROOTPW=$(echo $ARG | cut -f2 -d=) ;; toram) TORAM=1 VIRGIN=1 # prevent writes to disk since we are supposed to run from RAM ;; tweaks=*) # Comma-separated set of usability tweaks. # nga: no glamor 2d acceleration. # tpb: trackpoint scrolling while pressing middle mouse button. # syn: start synaptics daemon and extend X.Org capabilities. # ssh: start SSH daemon (disabled by default). TWEAKS=$(echo $ARG | cut -f2 -d=) ;; tz=*) TZ=$(echo $ARG | cut -f2 -d=) ;; waitforroot=*|rootdelay=*) WAIT=$(echo $ARG | cut -f2 -d=) ;; xkb=*) XKB=$(echo $ARG | cut -f2 -d=) ;; esac done [ $DEBUG -ge 2 ] && set -x debugit () { [ $DEBUG -eq 0 -o $DEBUG -gt 3 ] && return echo "DEBUG>> -- blkid info -- :" blkid | while read LINE ; do echo "DEBUG>> $LINE" ; done echo "DEBUG>> -- mount info -- :" mount | while read LINE ; do echo "DEBUG>> $LINE" ; done echo "DEBUG>> -- Press ENTER to continue -- : " read JUNK return } rescue() { echo if [ "x$1" != "x" ]; then echo "$1" else echo "RESCUE mode" echo echo " You can try to fix or rescue your system now. If you want" echo " to boot into your fixed system, mount your root filesystem" echo " read-only under /mnt:" echo echo " # mount -o ro -t filesystem root_device /mnt" fi echo echo " Type 'exit' when things are done." echo /bin/sh } # If udevd is available, use it to generate block devices # else use mdev to read sysfs and generate the needed devices if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then /sbin/udevd --daemon --resolve-names=never /sbin/udevadm trigger --subsystem-match=block --action=add if [ -n "$NFSHOST" ]; then # We also need network devices if NFS root is requested: if [ -z "$(/sbin/udevadm trigger --subsystem-match=net --action=add -v -n |rev |cut -d/ -f1 |rev |grep -v lo)" ]; then /sbin/udevadm trigger $DEBUGV else /sbin/udevadm trigger --subsystem-match=net --action=add $DEBUGV fi fi /sbin/udevadm settle --timeout=10 else [ "$DEVTMPFS" != "1" ] && mdev -s fi # Load kernel modules (ideally this was already done by udev): if [ ! -d /lib/modules/$(uname -r) ]; then echo "No kernel modules found for Linux $(uname -r)." elif [ -x ./load_kernel_modules ]; then # use load_kernel_modules script: echo "${MARKER}: Loading kernel modules from initrd image:" . ./load_kernel_modules 1>/dev/null 2>/dev/null else # load modules (if any) in order: if ls /lib/modules/$(uname -r)/*.*o 1> /dev/null 2> /dev/null ; then echo "${MARKER}: Loading kernel modules from initrd image:" for module in /lib/modules/$(uname -r)/*.*o ; do /sbin/modprobe $module 1>/dev/null 2>/dev/null done unset module fi fi # Sometimes the devices need extra time to be available. # A root filesystem on USB is a good example of that. sleep $WAIT # Fire at least one blkid: blkid 1>/dev/null 2>/dev/null # Load a custom keyboard mapping: if [ -n "$KEYMAP" ]; then echo "${MARKER}: Loading '$KEYMAP' keyboard mapping:" tar xzOf /etc/keymaps.tar.gz ${KEYMAP}.bmap | loadkmap fi if [ "$RESCUE" = "" ]; then if [ $LOCALHD -eq 1 ]; then # We will initialize RAID/LVM/BTRFS on local harddisks: # Initialize RAID: if [ -x /sbin/mdadm ]; then # If /etc/mdadm.conf is present, udev should DTRT on its own; # If not, we'll make one and go from there: if [ ! -r /etc/mdadm.conf ]; then /sbin/mdadm -E -s >/etc/mdadm.conf /sbin/mdadm -S -s /sbin/mdadm -A -s # This seems to make the kernel see partitions more reliably: fdisk -l /dev/md* 1> /dev/null 2> /dev/null fi fi # Initialize LVM: if [ -x /sbin/vgchange ]; then mkdir -p /var/lock/lvm # this avoids useless warnings /sbin/vgchange -ay --ignorelockingfailure 2>/dev/null /sbin/udevadm settle --timeout=10 fi # Scan for btrfs multi-device filesystems: if [ -x /sbin/btrfs ]; then /sbin/btrfs device scan fi fi # --------------------------------------------------------------------- # # SLACKWARE LIVE - START # # --------------------------------------------------------------------- # ## Support functions ## cidr_cvt() { # Function to convert the netmask from CIDR format to dot notation. # Number of args to shift, 255..255, first non-255 byte, zeroes set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0 [ $1 -gt 1 ] && shift $1 || shift echo ${1-0}.${2-0}.${3-0}.${4-0} } setnet() { # Find and configure the network interface for NFS root support. # Assume nothing about the method of network configuration: ENET_MODE="ask" echo "${MARKER}: Configuring network interface for NFS mount." # Does the commandline have NIC information for us? # Format is 'nic=driver:interface::ip:mask:gw' if [ -n "$ENET" ]; then DRIVER=$(echo $ENET |cut -f1 -d:) INTERFACE=$(echo $ENET |cut -f2 -d:) ENET_MODE=$(echo $ENET |cut -f3 -d:) if [ "$ENET_MODE" = "static" ]; then IPADDR=$(echo $ENET |cut -f4 -d:) NETMASK=$(echo $ENET |cut -f5 -d:) # We allow for CIDR notation of the netmask (0 < NETMASK < 25): if [ "$(echo $NETMASK |tr -cd '\.')" != "..." ]; then NETMASK=$(cidr_cvt $NETMASK) fi # Determine BROADCAST: eval $(ipcalc -b $IPADDR $NETMASK) # Not mandatory: GATEWAY=$(echo $ENET | cut -f6 -d:) fi fi # If no interface is present the cmdline should have provided a driver: if [ $(cat /proc/net/dev |grep ':' |sed -e "s/^ *//" |cut -f1 -d: |grep -v lo |wc -l) -eq 0 ]; then if [ "x${DRIVER}" != "x" ]; then # This takes silent care of 'DRIVER=auto' as well... modprobe ${DRIVER} 1>/dev/null 2>/dev/null fi fi # Let's determine the interface: if [ "x$INTERFACE" = "x" -o "$INTERFACE" = "auto" ]; then # Cmdline did not provide a nic or it's "auto" to let dhcpcd find out: for EDEV in $(cat /proc/net/dev |grep ':' |sed -e "s/^ *//" |cut -f1 -d: |grep -v lo) ; do if grep -q $(echo ${EDEV}: |cut -f 1 -d :): /proc/net/wireless ; then continue # skip wireless interfaces fi # If this configures an interface, we're done with dhcpcd afterwards: /sbin/dhcpcd -L -p -t $DHCPWAIT $EDEV & done unset EDEV # Wait at most DHCPWAIT seconds for a DHCP-configured interface to appear: for ITER in $(seq 0 $DHCPWAIT); do if $(ip -f inet -o addr show | grep -v " lo " 1>/dev/null 2>/dev/null) then # Found one! break fi sleep 1 done # What interface did dhcpcd configure? INTERFACE="" for EDEV in $(cat /proc/net/dev |grep ':' |sed -e "s/^ *//" |cut -f1 -d: |grep -v lo); do if [ -s /run/dhcpcd/dhcpcd-${EDEV}.pid ]; then INTERFACE="${EDEV}" break fi done unset EDEV fi if [ "x$INTERFACE" = "x" ]; then # Failed to find a configured interface... desperate measure: echo "${MARKER}: Failed to find network interface... trouble ahead." INTERFACE="eth0" fi # We know our INTERFACE, so let's configure it: if [ "$ENET_MODE" = "ask" -o "$ENET_MODE" = "dhcp" ]; then # Invoke dhcpcd only if it was not called yet: if [ ! -s /run/dhcpcd/dhcpcd-${INTERFACE}.pid ]; then /sbin/dhcpcd -L -p -t $DHCPWAIT $INTERFACE fi else # Kill dhcpcd if we used it to find a statically configured interface: if [ -s /run/dhcpcd/dhcpcd-${INTERFACE}.pid ]; then /sbin/dhcpcd -k $INTERFACE fi # Static IP address requires IPADDRESS, NETMASK, NETMASK at a minimum: ifconfig $INTERFACE $IPADDR netmask $NETMASK broadcast $BROADCAST if [ -n "$GATEWAY" ]; then route add default gw $GATEWAY metric 1 fi fi # Store the interface MAC address so we may modify the hostname with it: HNMAC=$(ip link show ${INTERFACE} |grep link/ether |tr -s ' ' |cut -d ' ' -f3 |tr -d ':') } # End setnet() find_loop() { # The losetup of busybox is different from the real losetup - watch out! lodev=$(losetup -f) if [ -z "$lodev" ]; then # We exhausted the available loop devices, so create the block device: for NOD in $(seq 0 ${MAXLOOPS}); do if [ ! -b /dev/loop${NOD} ]; then mknod -m660 /dev/loop${NOD} b 7 ${NOD} break fi done lodev=/dev/loop${NOD} elif [ ! -b $lodev ]; then # We exhausted the available loop devices, so create the block device: mknod -m660 $lodev b 7 $(echo $lodev |sed %/dev/loop%%) fi echo "$lodev" } find_modloc() { MY_LOC="$1" MY_BASE="$2" if [ $TORAM -ne 0 ]; then # If we need to copy the module to RAM, we need a place for that: mkdir -p /mnt/live/toram # Copy the module to RAM before mounting it, preserving relative path: MODNAME="$(basename ${MY_LOC})" MODRELPATH="$(dirname ${MY_LOC} |sed "s,$MY_BASE,,")" mkdir -p /mnt/live/toram/${MODRELPATH} cp "${MY_LOC}" "/mnt/live/toram/${MODRELPATH}" MY_LOC="/mnt/live/toram/${MODRELPATH}/${MODNAME}" fi echo "${MY_LOC}" } load_modules() { # SUBSYS can be 'system', 'addons', 'optional': SUBSYS="$1" if ls /mnt/media/${LIVEMAIN}/${SUBSYS}/*.sxz 1>/dev/null 2>/dev/null ; then for MODULE in /mnt/media/${LIVEMAIN}/${SUBSYS}/*.sxz ; do MODBASE="$(basename ${MODULE} .sxz)" if [ "$SUBSYS" = "optional" ]; then # Load one or more optionals by using boot parameter 'load': # load=mod1[,mod2[,mod3]] if [ -z "$LOAD" -o -z "$(echo ",${LOAD}," |grep -i ",$(echo $MODBASE |cut -d- -f2),")" ]; then continue fi elif [ "$SUBSYS" = "addons" ]; then # Skip loading one or more addons by using boot parameter 'noload': # noload=mod1[,mod2[,mod3]] if [ -n "$NOLOAD" -a -n "$(echo ",${NOLOAD}," |grep -i ",$(echo $MODBASE |cut -d- -f2),")" ]; then echo "$MODBASE" >> /mnt/live/modules/skipped continue fi fi MODLOC=$(find_modloc ${MODULE} /mnt/media) mkdir /mnt/live/modules/${MODBASE} mount -t squashfs -o loop ${MODLOC} /mnt/live/modules/${MODBASE} RODIRS=":/mnt/live/modules/${MODBASE}${RODIRS}" # 0099-* are the Live customizations, exclude those for setup2hd: if ! echo ${MODBASE} | grep -q ^0099 ; then FS2HD=":/mnt/live/modules/${MODBASE}${FS2HD}" fi done fi } ## End support functions ## # We need a mounted filesystem here to be able to do a switch_root later, # so we create one in RAM: if [ $TORAM -eq 1 ]; then RAMSIZE=90% # need to be able to load the entire OS in RAM else RAMSIZE=50% # the default value. fi mount -t tmpfs -o defaults,size=${RAMSIZE} none /mnt # Find the Slackware Live media. # TIP: Increase WAIT to give USB devices a chance to be seen by the kernel. mkdir /mnt/media if [ -n "$NFSHOST" ]; then # NFS root. First configure our network interface: setnet # Mount the NFS share and hope for the best: mount -t nfs -o nolock,vers=3 $NFSHOST:$NFSPATH /mnt/media LIVEALL="$NFSHOST:$NFSPATH" LIVEMEDIA="$LIVEALL" # No writing on NFS exports, overlayfs does not support it: VIRGIN=1 elif [ -z "$LIVEMEDIA" ]; then # LIVEMEDIA not specified on the boot commandline using "livemedia=" # Filter out the block devices, only look at partitions at first: LIVEALL=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep "[0-9]$") LIVEMEDIA=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep "[0-9]$" |head -1) if [ ! -z "$LIVEMEDIA" ]; then # That was easy... we found the media straight away. # Determine filesystem type ('iso9660' means we found a CDROM/DVD) LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev) mount -t $LIVEFS -o ro $LIVEMEDIA /mnt/media else LIVEALL=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep -v "[0-9]$") LIVEMEDIA=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep -v "[0-9]$" |head -1) if [ ! -z "$LIVEMEDIA" ]; then # We found a block device with the correct label (non-UEFI media). # Determine filesystem type ('iso9660' means we found a CDROM/DVD) LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev) mount -t $LIVEFS -o ro $LIVEMEDIA /mnt/media else # Bummer... label not found; the ISO was extracted to a different device. # Separate partitions from block devices, look at partitions first: for SLDEVICE in $(blkid |cut -d: -f1 |grep "[0-9]$") $(blkid |cut -d: -f1 |grep -v "[0-9]$") ; do SLFS=$(blkid $SLDEVICE |rev |cut -d'"' -f2 |rev) mount -t $SLFS -o ro $SLDEVICE /mnt/media if [ -d /mnt/media/${LIVEMAIN} ]; then # Found our media! LIVEALL=$SLDEVICE LIVEMEDIA=$SLDEVICE LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev) break else umount $SLDEVICE unset SLDEVICE fi done fi fi if [ -n "$LIVEMEDIA" ]; then # Gotcha! break fi sleep 1 else # LIVEMEDIA was specified on the boot commandline using "livemedia=" if [ ! -b "$LIVEMEDIA" ]; then # Passed a UUID or LABEL? LIVEALL=$(findfs UUID=$LIVEMEDIA 2>/dev/null) || LIVEALL=$(findfs LABEL=$LIVEMEDIA 2>/dev/null) LIVEMEDIA="$LIVEALL" else LIVEALL="$LIVEMEDIA" fi if [ -z "$LIVEALL" ]; then echo "${MARKER}: Live media '$LIVEMEDIA' not found... trouble ahead." else if [ -n "$LIVEPATH" -a "$LIVEPATH" != "$LIVEMEDIA" ]; then # Boot option used: "livemedia=/dev/sdX:/path/to/live.iso", # instead of just "livemedia=/dev/sdX". # First mount the partition and then loopmount the ISO: SUPERMNT=/mnt/super_$(od -An -N1 -tu1 /dev/urandom |tr -d ' ') mkdir -p ${SUPERMNT} SUPERFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev) mount -t $SUPERFS -o ro $LIVEMEDIA ${SUPERMNT} if [ -f "${SUPERMNT}/$LIVEPATH" ]; then LIVEFS=$(blkid "${SUPERMNT}/$LIVEPATH" |rev |cut -d'"' -f2 |rev) LIVEALL="${SUPERMNT}/$LIVEPATH" LIVEMEDIA="$LIVEALL" MOUNTOPTS="loop" fi fi LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev) mount -t $LIVEFS -o ${MOUNTOPTS:-ro} $LIVEMEDIA /mnt/media fi fi # Finished determining the media availability, it should be mounted now. if [ ! -z "$LIVEMEDIA" ]; then echo "${MARKER}: Live media found at ${LIVEMEDIA}." if [ ! -d /mnt/media/${LIVEMAIN} ]; then echo "${MARKER}: However, live media was not mounted... trouble ahead." fi if [ "$LIVEMEDIA" != "$LIVEALL" ]; then echo "${MARKER}: NOTE: Multiple partitions with '$MEDIALABEL' label were found ($(echo $LIVEALL))... success not guaranteed." fi else echo "${MARKER}: No live media found... trouble ahead." echo "${MARKER}: Try adding \"rootdelay=20\" to the boot command." debugit rescue fi debugit # Start assembling our live system components below /mnt/live : mkdir /mnt/live # Mount our squashed modules (.sxz extension). mkdir /mnt/live/modules if [ $TORAM -ne 0 ]; then echo "${MARKER}: Copying Live modules to RAM, please be patient." fi # Modules were created in specific order and will be mounted in that order. # In the lowerdirs parameter for the overlay, the module with the highest # number (i.e. created last) will be leftmost in a colon-separated list: RODIRS="" FS2HD="" # First, the base Slackware system components: load_modules system # Next, the add-on (3rd party etc) components, if any: # Remember, module name must adhere to convention: "NNNN-modname-*.sxz" # where 'N' is a digit and 'modname' must not contain a dash '-'. load_modules addons # And finally any explicitly requested optionals (like nvidia drivers): # Remember, module name must adhere to convention: "NNNN-modname-*.sxz" # where 'N' is a digit and 'modname' must not contain a dash '-'. load_modules optional # Get rid of the starting colon: RODIRS=$(echo $RODIRS |cut -c2-) FS2HD=$(echo $FS2HD |cut -c2-) if [ $TORAM -ne 0 ]; then echo "${MARKER}: Live OS copied to RAM, you can remove the Live medium." if [ "LIVEFS" = "iso9660" ]; then eject ${LIVEMEDIA} fi fi # Setup persistence in case our media is writable, *and* the user # has created a directory "persistence" in the root of the media. # otherwise we let the block changes accumulate in RAM only. # Create the mount point for the writable upper directory of the overlay: # Assume the default to be a readonly media - we write to RAM: UPPERDIR=/mnt/live/changes OVLWORK=/mnt/live/.ovlwork if [ "$VIRGIN" = "0" ]; then if [ "LIVEFS" != "iso9660" -a -d /mnt/media/${PERSISTENCE} ]; then # Looks OK, but we need to remount the media in order to write # to the persistence directory: mount -o remount,rw /mnt/media # Try a write... just to be dead sure: if touch /mnt/media/${PERSISTENCE}/.rwtest 2>/dev/null && rm /mnt/media/${PERSISTENCE}/.rwtest 2>/dev/null ; then # Writable media and we are allowed to write to it. if [ "$WIPE_PERSISTENCE" = "1" ]; then echo "${MARKER}: Wiping existing persistent data in '/${PERSISTENCE}'." find /mnt/media/${PERSISTENCE}/ -mindepth 1 -exec rm -rf {} \; 2>/dev/null fi echo "${MARKER}: Writing persistent changes to media directory '/${PERSISTENCE}'." UPPERDIR=/mnt/media/${PERSISTENCE} OVLWORK=/mnt/media/.ovlwork fi elif [ "LIVEFS" != "iso9660" -a -f /mnt/media/${PERSISTENCE}.img ]; then # Use a container file; the filesystem needs to be writable: mount -o remount,rw /mnt/media # Find a free loop device to mount the persistence container file: prdev=$(find_loop) prdir=${PERSISTENCE}_$(od -An -N1 -tu1 /dev/urandom |tr -d ' ') mkdir -p /mnt/live/${prdir} losetup $prdev /mnt/media/${PERSISTENCE}.img # Check if the persistence container is LUKS encrypted: if cryptsetup isLuks $prdev 1>/dev/null 2>/dev/null ; then echo "Unlocking LUKS encrypted persistence file '/${PERSISTENCE}.img'" cryptsetup luksOpen $prdev ${PERSISTENCE} /dev/tty0 2>&1 if [ $? -ne 0 ]; then echo "${MARKER}: Failed to unlock persistence file '/${PERSISTENCE}.img'." echo "${MARKER}: Falling back to RAM." else # LUKS properly unlocked; from now on use the mapper device instead: prdev=/dev/mapper/${PERSISTENCE} fi fi prfs=$(blkid $prdev |rev |cut -d'"' -f2 |rev) mount -t $prfs $prdev /mnt/live/${prdir} 2>/dev/null if [ $? -ne 0 ]; then echo "${MARKER}: Failed to mount persistence file '/${PERSISTENCE}.img'." echo "${MARKER}: Falling back to RAM." else if [ "$WIPE_PERSISTENCE" = "1" ]; then echo "${MARKER}: Wiping existing persistent data in '/${PERSISTENCE}.img'." find /mnt/live/${prdir}/${PERSISTENCE}/ -mindepth 1 -exec rm -rf {} \; 2>/dev/null fi echo "${MARKER}: Writing persistent changes to file '/${PERSISTENCE}.img'." UPPERDIR=/mnt/live/${prdir}/${PERSISTENCE} OVLWORK=/mnt/live/${prdir}/.ovlwork fi fi else echo "${MARKER}: Writing changes to RAM - no persistence:" if [ ! -z "$LUKSVOL" ]; then # Even without persistence, we need to be able to write to the partition # if we are using a LUKS container file: mount -o remount,rw /mnt/media fi fi # Create the writable upper directory, plus the workdir which is required # for overlay to function (the two must be in the same POSIX filesystem): [ ! -d ${UPPERDIR} ] && mkdir -p ${UPPERDIR} [ ! -d ${OVLWORK} ] && mkdir -p ${OVLWORK} # Create the overlays of readonly and writable directories: mkdir -p /mnt/${LIVEMAIN}fs mkdir -p /mnt/overlay # We are going to use a readonly overlay of the unmodified filesystem # as source for 'setup2hd': mount -t overlay -o lowerdir=${FS2HD} overlay /mnt/${LIVEMAIN}fs # And this is the actual Live overlay: mount -t overlay -o workdir=${OVLWORK},upperdir=${UPPERDIR},lowerdir=${RODIRS} overlay /mnt/overlay if [ $? -ne 0 -a "$VIRGIN" = "0" ]; then # Failed to create the persistent overlay - try without persistence: echo "${MARKER}: Failed to create persistent overlay, attempting to continue in RAM." UPPERDIR=/mnt/live/changes OVLWORK=/mnt/live/.ovlwork mkdir -p ${UPPERDIR} mkdir -p ${OVLWORK} mount -t overlay -o workdir=${OVLWORK},upperdir=${UPPERDIR},lowerdir=${RODIRS} overlay /mnt/overlay fi debugit # Make the underpinning RAM fs accessible in the live system (for fun): mkdir -p /mnt/overlay/mnt/live mount --rbind /mnt/live /mnt/overlay/mnt/live mkdir -p /mnt/overlay/mnt/${LIVEMAIN}fs mount --bind /mnt/${LIVEMAIN}fs /mnt/overlay/mnt/${LIVEMAIN}fs # Same for the Linux filesystem on the USB stick: mkdir -p /mnt/overlay/mnt/livemedia if [ $TORAM -eq 0 ]; then mount --bind /mnt/media /mnt/overlay/mnt/livemedia else # For PXE server we need to provide kernel and initrd too, # not just the modules: cp -af /mnt/media/boot /mnt/live/toram/ mount --bind /mnt/live/toram /mnt/overlay/mnt/livemedia fi if [ ! -z "$USE_SWAP" ]; then # Use any available swap device: for SWAPD in $(blkid |grep TYPE="\"swap\"" |cut -d: -f1) ; do echo "${MARKER}: Enabling swapping to '$SWAPD'" echo "$SWAPD swap swap defaults 0 0" >> /mnt/overlay/etc/fstab done fi if [ ! -z "$KEYMAP" ]; then # Configure custom keyboard mapping in console and X: echo "${MARKER}: Switching live console to '$KEYMAP' keyboard" cat < /mnt/overlay/etc/rc.d/rc.keymap #!/bin/sh # Load the keyboard map. More maps are in /usr/share/kbd/keymaps. if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys ${KEYMAP} fi EOT chmod 755 /mnt/overlay/etc/rc.d/rc.keymap fi if [ ! -z "$KEYMAP" -o ! -z "$XKB" ]; then # Set a keyboard mapping in X.Org, derived from the console map if needed: # Variable XKB can be set to "XkbLayout,XkbVariant", like "xkb=ch,fr" # You can set just the XkbVariant by adding something like "kbd=ch xkb=,fr" XKBLAYOUT=$(echo $XKB |cut -d, -f1) XKBVARIANT=$(echo $XKB |cut -d, -f2) # Ensure that XKBLAYOUT gets a value; XKBVARIANT is allowed to be empty. if [ -z "$XKBLAYOUT" ]; then if [ -z "$KEYMAP" ]; then XKBLAYOUT="us" else XKBLAYOUT="$(echo $KEYMAP |cut -c1-2)" fi fi else XKBLAYOUT="us" fi echo "${MARKER}: Switching live X desktop to '$XKBLAYOUT' keyboard" # Germans use the AltGr key, so Scroll Lock will be their Compose Key: if [ "$XKBLAYOUT" = "de" ]; then XKBOPTIONS="compose:sclk" else XKBOPTIONS="compose:ralt" fi # If the layout is not 'us' then add 'us' as a secondary nevertheless: if [ "$XKBLAYOUT" != "us" ]; then XKBLAYOUT="$XKBLAYOUT,us" XKBVARIANT="$XKBVARIANT," XKBOPTIONS="grp:alt_shift_toggle,grp_led:scroll,$XKBOPTIONS" fi mkdir -p /mnt/overlay/etc/X11/xorg.conf.d cat < /mnt/overlay/etc/X11/xorg.conf.d/30-keyboard.conf Section "InputClass" Identifier "keyboard-all" Driver "evdev" Option "XkbLayout" "$XKBLAYOUT" Option "XkbVariant" "$XKBVARIANT" Option "XkbOptions" "$XKBOPTIONS" MatchIsKeyboard "on" EndSection EOT if [ ! -z "$LOCALE" ]; then # Configure custom locale: echo "${MARKER}: Switching to '$LOCALE' locale" sed -i -e "s/^ *export LANG=.*/export LANG=${LOCALE}/" /mnt/overlay/etc/profile.d/lang.sh fi if [ ! -z "$TZ" -a -f /mnt/overlay/usr/share/zoneinfo/${TZ} ]; then # Configure custom timezone: echo "${MARKER}: Configuring timezone '$TZ'" cp /mnt/overlay/usr/share/zoneinfo/${TZ} /mnt/overlay/etc/localtime rm /mnt/overlay/etc/localtime-copied-from ln -s /usr/share/zoneinfo/${TZ} /mnt/overlay/etc/localtime-copied-from # Configure the hardware clock to be interpreted as localtime and not UTC: cat < /mnt/overlay/etc/hardwareclock # /etc/hardwareclock # # Tells how the hardware clock time is stored. # You should run timeconfig to edit this file. localtime EOT # QT5 expects "/etc/localtime" to be a symlink. Slackware's file is a real # file so QT5 fails to determine the timezone and falls back to UTC. Fix: echo ${TZ} > /mnt/overlay/etc/timezone # KDE4 and PLASMA5 user timezone re-configuration: if [ -f /mnt/overlay/home/live/.kde/share/config/ktimezonedrc ]; then sed -i -e "s%^LocalZone=.*%LocalZone=${TZ}%" \ /mnt/overlay/home/live/.kde/share/config/ktimezonedrc fi if [ -f /mnt/overlay/home/live/.config/ktimezonedrc ]; then sed -i -e "s%^LocalZone=.*%LocalZone=${TZ}%" \ /mnt/overlay/home/live/.config/ktimezonedrc fi fi if [ ! -z "$LIVEPW" ]; then # User entered a custom live password on the boot commandline: echo "${MARKER}: Changing password for user 'live'." chroot /mnt/overlay /usr/sbin/chpasswd < /mnt/overlay/etc/HOSTNAME if [ -f /mnt/overlay/etc/NetworkManager/NetworkManager.conf ]; then sed -i -e "s/^hostname=.*/hostname=${LIVE_HOSTNAME}/" \ /mnt/overlay/etc/NetworkManager/NetworkManager.conf fi sed -i -e "s/^\(127.0.0.1\t*\)@DARKSTAR@.*/\1${LIVE_HOSTNAME}.example.net ${LIVE_HOSTNAME}/" /mnt/overlay/etc/hosts fi if [ -n "$NFSHOST" -a -s /run/dhcpcd/dhcpcd-${INTERFACE}.pid ]; then # Ensure that dhcpcd will find its configuration: mount --bind /var/lib/dhcpcd /mnt/overlay/var/lib/dhcpcd mkdir -p /mnt/overlay/run/dhcpcd mount --bind /run/dhcpcd /mnt/overlay/run/dhcpcd cat /etc/resolv.conf > /mnt/overlay/etc/resolv.conf # Disable NetworkManager: chmod -x /mnt/overlay/etc/rc.d/rc.networkmanager # De-configure rc.inet1: cat < /mnt/overlay/etc/rc.d/rc.inet1.conf IFNAME[0]="$INTERFACE" IPADDR[0]="" NETMASK[0]="" USE_DHCP[0]="" DHCP_HOSTNAME[0]="" GATEWAY="" DEBUG_ETH_UP="no" EOT fi # Tweaks: for TWEAK in $(echo $TWEAKS |tr ',' ' '); do if [ "$TWEAK" = "nga" ]; then # Disable glamor 2D acceleration (QEMU needs this): cat < /mnt/overlay/etc/X11/xorg.conf.d/20-noglamor.conf Section "Device" Identifier "modesetting" Driver "modesetting" Option "AccelMethod" "none" EndSection EOT elif [ "$TWEAK" = "tpb" ]; then # Enable scrolling with TrackPoint while pressing the middle mouse button. # Note: if this does not work for your TrackPoint, # replace "TPPS/2 IBM TrackPoint" with the name found in "xinput --list" cat < /mnt/overlay/etc/X11/xorg.conf.d/20-trackpoint.conf Section "InputClass" Identifier "Trackpoint Wheel Emulation" MatchProduct "TPPS/2 IBM TrackPoint|DualPoint Stick|Synaptics Inc. Composite TouchPad / TrackPoint|ThinkPad USB Keyboard with TrackPoint|USB Trackpoint pointing device|Composite TouchPad / TrackPoint" MatchDevicePath "/dev/input/event*" Option "Emulate3Buttons" "true" Option "EmulateWheel" "true" Option "EmulateWheelTimeout" "200" Option "EmulateWheelButton" "2" Option "XAxisMapping" "6 7" Option "YAxisMapping" "4 5" EndSection EOT elif [ "$TWEAK" = "syn" ]; then # Enable syndaemon for better management of Synaptics touchpad. mkdir -p /mnt/overlay/etc/xdg/autostart cat < /mnt/overlay/etc/xdg/autostart/syndaemon.desktop [Desktop Entry] Version=1.0 Name=Synaptics deamon Comment=Enable proper communication with Synaptics touchpad Exec=syndaemon -d -t -k -i 1 Terminal=false Type=Application Categories= GenericName= X-GNOME-Autostart-Phase=Initialization X-KDE-autostart-phase=1 X-MATE-Autostart-Phase=Initialization EOT # Extend what's in /usr/share/X11/xorg.conf.d/50-synaptics.conf cat < /mnt/overlay/etc/X11/xorg.conf.d/50-synaptics.conf # Use "synclient -l" to see all available options # Use "man synaptics" for details about what the options do Section "InputClass" Identifier "touchpad" Driver "synaptics" MatchDevicePath "/dev/input/event*" MatchIsTouchpad "on" Option "TapButton1" "1" Option "TapButton2" "2" Option "TapButton3" "3" Option "VertTwoFingerScroll" "1" Option "HorizTwoFingerScroll" "1" Option "VertEdgeScroll" "1" EndSection EOT elif [ "$TWEAK" = "ssh" ]; then # Enable SSH daemon (disabled by default for security reasons): chmod +x /mnt/overlay/etc/rc.d/rc.sshd fi done # End Tweaks. # Blacklist kernel modules if requested: if [ ! -z "$BLACKLIST" ]; then mkdir -p /mnt/overlay/etc/modprobe.d echo "#Slackware Live blacklist" > /mnt/overlay/etc/modprobe.d/BLACKLIST-live.conf for kernelmod in $(echo $BLACKLIST |tr ',' ' '); do echo "blacklist $kernelmod" >> /mnt/overlay/etc/modprobe.d/BLACKLIST-live.conf done fi # Find out if the user enabled any optional/addon kernel modules: RUN_DEPMOD=0 for MOD in $(cat /sys/block/loop*/loop/backing_file |grep -E "optional|addons") do if [ -d /mnt/live/modules/$(basename $MOD .sxz)/lib/modules/$(uname -r)/ ] then # Found kernel modules directory; we need to make a 'depmod' call. RUN_DEPMOD=1 fi done if [ $RUN_DEPMOD -eq 1 ]; then # This costs a few seconds in additional boot-up time unfortunately: echo "${MARKER}: Additional kernel module(s) found... need a bit" chroot /mnt/overlay /sbin/depmod -a fi unset RUN_DEPMOD # Delete ALSA state file, the Live OS may be booted on different computers: rm -f /mnt/overlay/var/lib/alsa/asound.state # In case of network boot, do not kill the network, umount NFS prematurely # or stop udevd on shutdown: if [ -n "$NFSHOST" ]; then sed -i /mnt/overlay/etc/rc.d/rc.0 \ -e "/on \/ type nfs/s%grep -q 'on / type nfs'%egrep -q 'on / type (nfs|tmpfs)'%" \ -e '/umount.*nfs/s/nfs,//' \ -e 's/rc.udev force-stop/rc.udev stop/' \ -e 's/$(pgrep mdmon)/& $(pgrep udevd)/' fi # Copy contents of rootcopy directory (may be empty) to overlay: cp -af /mnt/media/${LIVEMAIN}/rootcopy/* /mnt/overlay/ 2>/dev/null # Bind any LUKS container into the Live filesystem: if [ ! -z "$LUKSVOL" ]; then for luksvol in $(echo $LUKSVOL |tr ',' ' '); do luksfil="$(echo $luksvol |cut -d: -f1)" luksmnt="$(echo $luksvol |cut -d: -f2)" luksnam="$(echo $(basename $luksfil) |tr '.' '_')" if [ "$luksmnt" = "$luksfil" ]; then # No optional mount point specified, so we use the default: /home/ luksmnt="/home" fi # Find a free loop device: lodev=$(find_loop) losetup $lodev /mnt/media/$luksfil echo "Unlocking LUKS encrypted container '$luksfil' at mount point '$luksmnt'" cryptsetup luksOpen $lodev $luksnam /dev/tty0 2>&1 if [ $? -ne 0 ]; then echo "${MARKER}: Failed to unlock LUKS container '$luksfil'... trouble ahead." else # Create the mount directory if it does not exist (unlikely): mkdir -p /mnt/overlay/$luksmnt # Let Slackware mount the unlocked container: luksfs=$(blkid /dev/mapper/$luksnam |rev |cut -d'"' -f2 |rev) if ! grep -q /dev/mapper/$luksnam /mnt/overlay/etc/fstab ; then echo "/dev/mapper/$luksnam $luksmnt $luksfs defaults 1 1" >> /mnt/overlay/etc/fstab fi # On shutdown, ensure that the container gets locked again: if ! grep -q "$luksnam $luksmnt" /mnt/overlay/etc/crypttab ; then echo "$luksnam $luksmnt" >> /mnt/overlay/etc/crypttab fi fi done fi [ $DEBUG -gt 3 ] && rescue "DEBUG SHELL" # --------------------------------------------------------------------- # # SLACKWARE LIVE - !END! # # --------------------------------------------------------------------- # # Minimal changes to the original Slackware init follow: # Switch to real root partition: /sbin/udevadm settle --timeout=10 echo 0x0100 > /proc/sys/kernel/real-root-dev if [ ! -r /mnt/overlay/${INIT} ]; then echo "ERROR: No ${INIT} found on rootdev (or not mounted). Trouble ahead." echo " You can try to fix it. Type 'exit' when things are done." echo /bin/sh fi else rescue fi # Need to make sure OPTIONS+="db_persist" exists for all dm devices # That should be handled in /sbin/mkinitrd now /sbin/udevadm info --cleanup-db /sbin/udevadm control --exit unset ERR umount /proc umount /sys umount /run 2>/dev/null # We disable the filesystem checking code in /etc/rc.d/rc.S, # so we need to keep the fs writable here. #mount -o ro,remount /mnt/overlay 2>/dev/null echo "${MARKER}: Slackware Live system is ready." echo "${MARKER}: exiting" exec switch_root /mnt/overlay $INIT $RUNLEVEL