summaryrefslogtreecommitdiffstats
path: root/syslinux/isolinux.cfg (unfollow)
Commit message (Expand)AuthorFilesLines
2016-04-22iso2usb.sh: fix detection of UEFI support in the ISO image file. Eric Hameleers1-5/+2
2016-04-22liveinit: make the DHCP wait time configurable and set a longer default....New boot parameter: dhcpwait=<numseconds> Maximum wait time for the DHCP client to configure a network interface (new default: 20 seconds, was 10 seconds). Eric Hameleers2-7/+14
2016-04-22make_slackware_live.sh: add parameter to specify custom ISO name....New parameter: -O outfile => Full path to a custom filename for the ISO. Eric Hameleers1-9/+16
2016-04-21Allow CONFFILE to be specified as an environment variable. Eric Hameleers1-1/+1
2016-04-20make_slackware_live.sh: fixes for kernel detection & selection on 32bit arch. Eric Hameleers1-8/+26
2016-04-19Slackware Live Edition: version 0.8.0.0.8.0 Eric Hameleers1-1/+1
2016-04-19MATE: update to Mate 1.14. Eric Hameleers2-9/+3
2016-04-19PLASMA5: refresh the package lists. Eric Hameleers2-7/+27
2016-04-19make_slackware_live.sh: also add dependencies of network modules to initrd. Eric Hameleers1-2/+27
2016-04-19liveinit: make the udev trigger for net devices more rebust. Eric Hameleers1-10/+21
2016-04-17Add a post-install customization hook to 'setup2hd'....A new file 'setup2hd.local' has been added to the liveslak sources. If you do not touch that one, it will be copied to: /usr/share/${LIVEMAIN}/setup2hd.$DISTRO.sample and serve as just that, a sample script. If on the other hand you rename the file to 'setup2hd.$DISTRO' before generating your ISO image ($DISTRO being the name of your own distro, like 'CINELIVE'), then this file will be installed in the ISO as /usr/share/${LIVEMAIN}/setup2hd.$DISTRO and this will be sourced by 'setup2hd' providing you a custom post-install customization hook for your own Live distro. Usage instructions are inside 'setup2hd.local'. Eric Hameleers3-30/+156
2016-04-15iso2usb.sh: only umount if the directory was actually mounted. Eric Hameleers1-3/+3
2016-04-13iso2usb.sh: use XZ for compressing/decompressing the initrd. Eric Hameleers1-3/+16
2016-04-13Use XZ compression for the initrd instead of GZIP....This shrinks the initrd back from 22 to 17 MB in size. Also, a redundant copy of the initrd was removed from the '0000-slackware_boot' module, reducing the ISO size with an additional 17 MB. These two modifications compensate for the increased size due to addition of network modules and firmware (which are needed for network boot). Goal reached: the XFCE ISO still fits on CDROM media. Eric Hameleers1-7/+27
2016-04-13README.txt updated for the network boot (NFS root) functionality. Eric Hameleers1-0/+41
2016-04-13Add NFS root support....It is now possible to PXE-boot the Slackware Live Edition. Extract the content of the ISO to (for instance) a new directory called 'slackware-live' below your TFTP server's /tftproot directory and then add lines like this to your pxelinux.cfg/default file: label liveslak kernel slackware-live/boot/generic append initrd=slackware-live/boot/initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=us tz=Europe/Amsterdam locale=us_EN.utf8 nfsroot=192.168.0.1:/tftpboot/slackware-live hostname=pxelive Two new boot parameters have been added to support a NFS root: * nfsroot => mandatory parameter defines the IP address of the NFS server and the path to the extracted content of Slackware Live Edition. * nic => parameter defining the driver for the network card (optional and usually not needed because UDEV will figure out the driver for you), the interface name (optional), the IP configuration method (static IP or DHCP), and in case of a static IP, the required parameters ipaddress, netmask and an optional gateway. Note that the 'nic' parameter is optional if you have a DHCP server in your LAN: Slackware Live will figure out what the interface name is. Syntax of these parameters: nfsroot=ip.ad.dr.ess:/path/to/liveslak nic=<driver>:<interface>:<dhcp|static>[:ipaddr:netmask[:gateway]] Example use of these parameters: nfsroot=192.168.1.1:/tftproot/slackware-live nic=auto:eth0:static:10.0.0.21:24: nic=:eth1:static:192.168.1.6:255.255.255.248:192.168.1.1 Eric Hameleers2-2/+186
2016-04-12Umount LIVE_ROOTDIR's sub-mounts properly on emergency cleanup. Eric Hameleers1-0/+3
2016-04-08liveinit: correctly create an overlay of all installed content....The 'setup2hd' script will use this readonly overlay to install to your harddrive. However, this readonly overlay still contained the Live customizations which you do not want copied over to your harddrive. This update fixes the logical fallacy so that 'setup2hd' works properly now. Eric Hameleers1-5/+12
2016-03-29XFCE: add 'squashfs-tools' to the minimal package list (min.lst)....The squashfs-tools are an essential package when using 'setup2hd', the Slackware Live OS' harddisk installer. The XFCE ISO does not contain setup2hd at all (it only gets added to ISOs with a huge kernel) but if someone creates a custom Live OS containing a huge kernel but based on the minimal XFCE variant, this custom Live OS requires the presence of unsquashfs, or else 'setup2hd' will fail. Eric Hameleers1-0/+1
2016-03-29Fix the 'setup2hd' script's method of Live content installation....In the original version of the script, the squashfs modules' contents would be extracted one after the other. However this disregards any package or file deletions inbetween modules. As a result, e.g. a PLASMA5 installation to disk using 'setup2hd' would leave several artefacts in removed_scripts and removed_packages and probably in other locations too. The overlay is now constructed somewhat differently, so that 'setup2hd' can access the full read-only filesystem properly; it will copy this content to the harddisk using rsync. A progress indicator will show the stats of files that are actually being transferred. At the same time, the 'setup2hd' script's language settings are now hard-coded by setting 'LC_ALL' and LANG to "C". Slackware's setup scripts parse command output and expect english texts there, but when you selected a different language when booting your Live OS, this would confuse e.g. 'liloconfig' to the extent that it failed to find the Linux partitions. Eric Hameleers3-42/+52
2016-03-23Changed layout of README.txt slightly for better match with Wiki version....When changes need to be made to README.txt and its Wiki version at http://docs.slackware.com/slackware:liveslak I want to be able to diff the two easily. Eric Hameleers1-138/+201
2016-03-23Fix a bug in the program flow related to CONSFONT....If the predefined console font (CONSFONT variable) was not found on the system, the make_slackware_live.sh script would abort with an error. Eric Hameleers1-6/+7
2016-03-18Add support for 32-bit UEFI boot (disabled by default)....This requires functionality in grub which is currently not enabled in Slackware's grub package. If you want a 32-bit Live ISO that boots on UEFI computers, you need to recompile Slackware's grub with the patch for grub.SlackBuild which you can find in the ./patches subdirectory. Then you need to set the variable "EFI32" to "YES" in the 'make_slackware_live.sh' script and (re-)generate your 32-bit ISO. The resulting 32-bit Live ISO will be UEFI-bootable. Eric Hameleers3-47/+84