| Commit message (Expand) | Author | Age | Files | Lines |
|---|
| ... | |
| * | On 32bit, use the non-SMP kernel by default....You can define SMP32="YES" in the script or in its .conf file,
if you want your Live ISO to boot the 32bit SMP kernel instead.
|   Eric Hameleers | 2016-06-10 | 1 | -2/+2 |
| * | VERSION bump to 1.0.2. | Eric Hameleers | 2016-06-03 | 1 | -1/+1 |
| * | Add the 'live' user account to additonal groups "dialout,games,disk"....The "dialout" group is required for working with 3G USB modems and
ppp connections. If the user wants to play UNIX games, then the "games"
group membership is needed. And "disk" group was added for good measure.
| Eric Hameleers | 2016-06-03 | 1 | -1/+1 |
| * | XFCE: do not copy optional/ or addons/ content into the XFCE ISO....We need to maintain strict size requirements to keep the maximum size
of the XFCE ISO below 737.280.000 bytes (703 MB) so that it fits on CDROM.
You can always add optional/addons modules later if you create a USB Live
medium out of the ISO.
| Eric Hameleers | 2016-05-29 | 1 | -8/+11 |
| * | Some cosmetic cleanups. | Eric Hameleers | 2016-05-29 | 1 | -9/+8 |
| * | make_slackware_live.sh: add "-X" switch to generate the ISO with xorriso....For some people, an ISO generated with xorriso instead of using
mkisofs/isohybrid is more compatible with other tools or hardware.
You need to install xorriso separately, it is not included with Slackware.
| Eric Hameleers | 2016-05-29 | 1 | -26/+58 |
| * | VERSION bump to 1.0.1. | Eric Hameleers | 2016-05-28 | 1 | -1/+1 |
| * | XFCE: take into account that the 32bit ISO does not contain a SMP kernel....In order to successfully generate a 32bit ISO of the small XFCE variant,
the variable SMP32 needs to be set to "NO" because the package for the SMP
kernel will not be added (due to size constraints).
Example commandline to achieve this:
SMP32=NO ./make_slackware_live.sh -d XFCE -a i586
| Eric Hameleers | 2016-05-27 | 1 | -1/+5 |
| * | slackpkg+: my package repository is no longer hosted on taper but on bear....The URLs mentioning 'taper' instead of 'bear' will still work because
the webserver on taper will do automatic redirection to bear.
| Eric Hameleers | 2016-05-19 | 1 | -3/+3 |
| * | Slackware Live Edition: version 1.0.0....I think this 'liveslak' product is in a pretty stable state now.
1.0.0 | Eric Hameleers | 2016-05-17 | 1 | -1/+1 |
| * | Call 'depmod' when a loaded optional/addon contains kernel modules. | Eric Hameleers | 2016-05-17 | 1 | -3/+17 |
| * | Fix logic errors in 'if' statements when looking for wildcard files. | Eric Hameleers | 2016-05-17 | 1 | -3/+3 |
| * | Disable the SSH daemon by default and use a tweak to start it on demand....The passwords for users 'live' and 'root' are easy to guess.
When you use the Slackware Live Edition on a public network,
you do not want people to use an exposed SSH login.
If you still want to have the SSH daemon enabled on boot, use the
'tweak' boot parameter and provide a 'ssh' value as follows:
"tweak=ssh"
This can be combined with other tweaks of course, all comma-separated.
| Eric Hameleers | 2016-05-17 | 1 | -1/+2 |
| * | Bump VERSION to 0.9.1. | Eric Hameleers | 2016-05-13 | 1 | -1/+1 |
| * | Fixes for the broken 'load/noload' boot parameters and rootcopy location....Provided by GigglesUK, thanks.
| Eric Hameleers | 2016-05-12 | 1 | -1/+1 |
| * | Slackware Live Edition: version 0.9.0....And it is ready for a stable 1.0.0 version if no further bugs are uncovered.
0.9.0 | Eric Hameleers | 2016-05-05 | 1 | -1/+1 |
| * | Add PXE server infrastructure....See the README.txt for instructions on how to use the 'pxeserver' script
and what it can do for you.
| Eric Hameleers | 2016-05-05 | 1 | -0/+19 |
| * | Silence one "cd -". | Eric Hameleers | 2016-05-05 | 1 | -1/+1 |
| * | Update the 'timeconfig' script in make_slackware_live.sh, not in liveinit. | Eric Hameleers | 2016-04-29 | 1 | -0/+9 |
| * | Do not specify heads/sectors when calling "isohybrid -u"....The resulting ISO will boot on real hardware as well as in virtualizers
like QEMU, VirtualBox and VMWare Player, despite the warning shown by
isohybrid that the ISO has more than 1024 cilynders and not all BIOSes
will be able to boot it.
Specifying sectors/heads to stay "standard compliant" will generate ISO
files that fail to boot in VirtualBox if the ISO filesize is larger
than roughly 1 GB, spitting out the error "VERR_NOT_SUPPORTED".
| Eric Hameleers | 2016-04-27 | 1 | -17/+1 |
| * | Deal with custom timezones (non-UTC) in KDE4 and PLASMA5. | Eric Hameleers | 2016-04-27 | 1 | -0/+19 |
| * | make_slackware_live.sh: accept custom ISO filename without full pathname. | Eric Hameleers | 2016-04-24 | 1 | -3/+3 |
| * | Do not bail out if there are no X apps in the ISO. | Eric Hameleers | 2016-04-22 | 1 | -1/+3 |
| * | make_slackware_live.sh: add parameter to specify custom ISO name....New parameter:
-O outfile => Full path to a custom filename for the ISO.
| Eric Hameleers | 2016-04-22 | 1 | -9/+16 |
| * | Allow CONFFILE to be specified as an environment variable. | Eric Hameleers | 2016-04-21 | 1 | -1/+1 |
| * | make_slackware_live.sh: fixes for kernel detection & selection on 32bit arch. | Eric Hameleers | 2016-04-20 | 1 | -8/+26 |
| * | Slackware Live Edition: version 0.8.0.0.8.0 | Eric Hameleers | 2016-04-19 | 1 | -1/+1 |
| * | make_slackware_live.sh: also add dependencies of network modules to initrd. | Eric Hameleers | 2016-04-19 | 1 | -2/+27 |
| * | Add a post-install customization hook to 'setup2hd'....A new file 'setup2hd.local' has been added to the liveslak sources.
If you do not touch that one, it will be copied to:
/usr/share/${LIVEMAIN}/setup2hd.$DISTRO.sample and serve as just that,
a sample script.
If on the other hand you rename the file to 'setup2hd.$DISTRO' before
generating your ISO image ($DISTRO being the name of your own distro,
like 'CINELIVE'), then this file will be installed in the ISO as
/usr/share/${LIVEMAIN}/setup2hd.$DISTRO and this will be sourced
by 'setup2hd' providing you a custom post-install customization hook
for your own Live distro.
Usage instructions are inside 'setup2hd.local'.
| Eric Hameleers | 2016-04-17 | 1 | -0/+23 |
| * | Use XZ compression for the initrd instead of GZIP....This shrinks the initrd back from 22 to 17 MB in size.
Also, a redundant copy of the initrd was removed from the
'0000-slackware_boot' module, reducing the ISO size with an
additional 17 MB.
These two modifications compensate for the increased size due to
addition of network modules and firmware (which are needed for
network boot).
Goal reached: the XFCE ISO still fits on CDROM media.
| Eric Hameleers | 2016-04-13 | 1 | -7/+27 |
| * | Add NFS root support....It is now possible to PXE-boot the Slackware Live Edition.
Extract the content of the ISO to (for instance) a new directory
called 'slackware-live' below your TFTP server's /tftproot directory
and then add lines like this to your pxelinux.cfg/default file:
label liveslak
kernel slackware-live/boot/generic
append initrd=slackware-live/boot/initrd.img load_ramdisk=1 prompt_ramdisk=0 rw printk.time=0 kbd=us tz=Europe/Amsterdam locale=us_EN.utf8 nfsroot=192.168.0.1:/tftpboot/slackware-live hostname=pxelive
Two new boot parameters have been added to support a NFS root:
* nfsroot => mandatory parameter defines the IP address of the NFS server
and the path to the extracted content of Slackware Live Edition.
* nic => parameter defining the driver for the network card (optional
and usually not needed because UDEV will figure out the driver for you),
the interface name (optional),
the IP configuration method (static IP or DHCP),
and in case of a static IP, the required parameters ipaddress, netmask
and an optional gateway.
Note that the 'nic' parameter is optional if you have a DHCP server in
your LAN: Slackware Live will figure out what the interface name is.
Syntax of these parameters:
nfsroot=ip.ad.dr.ess:/path/to/liveslak
nic=<driver>:<interface>:<dhcp|static>[:ipaddr:netmask[:gateway]]
Example use of these parameters:
nfsroot=192.168.1.1:/tftproot/slackware-live
nic=auto:eth0:static:10.0.0.21:24:
nic=:eth1:static:192.168.1.6:255.255.255.248:192.168.1.1
| Eric Hameleers | 2016-04-13 | 1 | -1/+36 |
| * | Umount LIVE_ROOTDIR's sub-mounts properly on emergency cleanup. | Eric Hameleers | 2016-04-12 | 1 | -0/+3 |
| * | Fix the 'setup2hd' script's method of Live content installation....In the original version of the script, the squashfs modules' contents
would be extracted one after the other.
However this disregards any package or file deletions inbetween modules.
As a result, e.g. a PLASMA5 installation to disk using 'setup2hd' would
leave several artefacts in removed_scripts and removed_packages and probably
in other locations too.
The overlay is now constructed somewhat differently, so that 'setup2hd' can
access the full read-only filesystem properly; it will copy this content
to the harddisk using rsync. A progress indicator will show the stats of
files that are actually being transferred.
At the same time, the 'setup2hd' script's language settings are now
hard-coded by setting 'LC_ALL' and LANG to "C". Slackware's setup scripts
parse command output and expect english texts there, but when you selected
a different language when booting your Live OS, this would confuse e.g.
'liloconfig' to the extent that it failed to find the Linux partitions.
| Eric Hameleers | 2016-03-29 | 1 | -1/+1 |
| * | Fix a bug in the program flow related to CONSFONT....If the predefined console font (CONSFONT variable) was not found
on the system, the make_slackware_live.sh script would abort with an error.
| Eric Hameleers | 2016-03-23 | 1 | -6/+7 |
| * | Add support for 32-bit UEFI boot (disabled by default)....This requires functionality in grub which is currently not enabled
in Slackware's grub package.
If you want a 32-bit Live ISO that boots on UEFI computers, you need
to recompile Slackware's grub with the patch for grub.SlackBuild which
you can find in the ./patches subdirectory.
Then you need to set the variable "EFI32" to "YES" in the
'make_slackware_live.sh' script and (re-)generate your 32-bit ISO.
The resulting 32-bit Live ISO will be UEFI-bootable.
| Eric Hameleers | 2016-03-18 | 1 | -42/+67 |
| * | New parameters to specify Slackware version and architecture....The 'make_slackware_live.sh' script now has two extra parameters:
-a arch
Specify machine architecture (default: 'x86_64').
Use i586 for a 32bit ISO, x86_64 for 64bit.
-z version
Specify the Slackware version (default: 'current').
| Eric Hameleers | 2016-03-18 | 1 | -26/+42 |
| * | Further expand the use of DISTRO variable to customize the Live ISO. | Eric Hameleers | 2016-03-15 | 1 | -3/+18 |
| * | Slackware Live Edition: version 0.7.0.0.7.0 | Eric Hameleers | 2016-03-15 | 1 | -1/+1 |
| * | Use the right variable to access official Slackware READMEs and other docs. | Eric Hameleers | 2016-03-15 | 1 | -2/+2 |
| * | Use internal variable DISTRO=slackware. | Eric Hameleers | 2016-03-10 | 1 | -22/+25 |
| * | Only add graphics drivers module matching the Linux kernel in the Live ISO. | Eric Hameleers | 2016-03-09 | 1 | -3/+3 |
| * | Remove the /SLACKWARELIVE marker file from the filesystem root....After installation to harddisk using the 'setup2hd' script, this
marker file is a Live OS left over and will only cause confusion.
| Eric Hameleers | 2016-03-03 | 1 | -0/+1 |
| * | Use correct grep command to find unique package name....The grep command used so far would find "vim-gvim" when searching for "vim"
because it did not try to match from the beginning of the string.
| Eric Hameleers | 2016-02-28 | 1 | -3/+21 |
| * | Determine KGEN properly so that it works for 32-bit Slackware as well....Thanks to SangDae YU for pointing it out.
| Eric Hameleers | 2016-02-27 | 1 | -3/+3 |
| * | Better safe than sorry. | Eric Hameleers | 2016-02-27 | 1 | -1/+1 |
| * | Some small improvements for the harddisk installer. | Eric Hameleers | 2016-02-24 | 1 | -1/+1 |
| * | Define KVER and KGEN at the proper location in the script. | Eric Hameleers | 2016-02-24 | 1 | -0/+4 |
| * | Slackware Live Edition: version 0.6.0.0.6.0 | Eric Hameleers | 2016-02-24 | 1 | -1/+1 |
| * | Add 'setup2hd' - this script will install the Live OS to local hard disk....The 'setup2hd' script is a modified version of 'setup' in the Slackware
installer, taken straight from the initrd.
The SOURCE selection has been removed since the script knows where to
find the Live media.
Except for the actual extraction of Slackware Live content to your
hard drive, the other hard disk installation steps are unmodified from
the stock Slackware installer.
| Eric Hameleers | 2016-02-24 | 1 | -1/+36 |
| * | Fix fontconfig. | Eric Hameleers | 2016-02-24 | 1 | -4/+4 |
Eric Hameleers