# Liveslak installation routine:
if [ "$MAINSELECT" = "INSTALL" ]; then
if [ ! -r $TMP/SeTnative ]; then
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "CANNOT INSTALL SOFTWARE YET" --msgbox "\
\n\
Before you can install software, complete the following tasks:\n\
\n\
1. Set up your target Linux partition(s).\n\
\n\
You may also optionally remap your keyboard and set up your\n\
swap partition(s). \n\
\n\
Press ENTER to return to the main menu." 16 68
continue
fi
# --------------------------------------------- #
# Slackware Live Edition - install to disk: #
# --------------------------------------------- #
# Buy us some time while we are calculating disk usage:
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --infobox \
"\nCalculating disk usage, please be patient ..." 5 65
ACT_MODS=$(ls -rt --indicator-style=none /mnt/live/modules/ |wc -l)
TOT_MODS=$(find /mnt/livemedia/@LIVEMAIN@/ -type f -name "*.sxz" |wc -l)
DU_LIVE=$(du -s /mnt/live/modules/ 2>/dev/null |tr -s '\t' ' ' |cut -f1 -d' ')
PARTFREE=$(df -P -BM $T_PX |tail -1 |tr -s '\t' ' ' |cut -d' ' -f4)
PARTFREE=${PARTFREE%M}
# Warn when it looks we have insufficient room:
if [ $PARTFREE -lt $(($DU_LIVE/1024)) ]; then
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --yesno \
"\nAvailable space: $PARTFREE MB\nRequired space: $(($DU_LIVE/1024))\nIt looks like your hard drive partition is too small.\nDo you want to continue?" 10 65
retval=$?
if [ $retval = 1 ]; then
umount $T_PX
exit 1
fi
else
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "WELCOME TO @UDISTRO@ LIVE (@LIVEDE@)" --msgbox \
"\nAvailable space: $PARTFREE MB\nRequired space: $(($DU_LIVE/1024)) MB\nIt looks like you're good to go!" 10 65
fi
(
# Install the Live OS by rsyncing the readonly overlay to the harddisk:
rsync -HAXav --whole-file --checksum-choice=none --inplace --progress --no-inc-recursive \
/mnt/@LIVEMAIN@fs/ $T_PX/ \
| awk '{ if (index($0, "to-chk=") > 0) { split($0, pieces, "to-chk="); split(pieces[2], term, ")"); split(term[1], division, "/"); print (1-(division[1]/division[2]))*100 }; fflush(); }' \
| sed --unbuffered 's/^\([0-9]*\).*/\1/'
) | dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "INSTALLING @UDISTRO@ LIVE (@LIVEDE@) TO DISK" --gauge \
"\nProcessing ${TOT_MODS} @CDISTRO@ Live modules ($(( $DU_LIVE/1024 )) MB)" 8 65
#
# Live OS Post Install routine. If you want, you can override this routine
# by (re-)defining this function "live_post_install()" in a file called
# "/usr/share/@LIVEMAIN@/setup2hd.@DISTRO@".
#
live_post_install () {
# Re-use some of the custom configuration from 0099-@DISTRO@_zzzconf-*.sxz
# (some of these may not be present but the command will not fail):
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "POST-INSTALL @UDISTRO@ LIVE (@LIVEDE@) DATA" --infobox \
"\nCopying Live modifications to hard disk ..." 5 65
sleep 1 # It's too fast...
# Do not overwrite a custom keymap:
if [ ! -f $T_PX/etc/rc.d/rc.keymap ]; then
unsquashfs -f -dest $T_PX \
/mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
/etc/rc.d/rc.keymap
fi
unsquashfs -f -dest $T_PX \
/mnt/livemedia/@LIVEMAIN@/system/0099*zzzconf*.sxz \
/etc/X11/xdm/liveslak-xdm \
/etc/X11/xorg.conf.d/30-keyboard.conf \
/etc/inittab \
/etc/skel \
/etc/profile.d/lang.sh \
/etc/rc.d/rc.font \
/etc/rc.d/rc.gpm \
/etc/slackpkg \
/etc/vconsole.conf
# Point xdm to the custom /etc/X11/xdm/liveslak-xdm/xdm-config:
sed -i ${T_PX}/etc/rc.d/rc.4 -e 's,bin/xdm -nodaemon,& -config /etc/X11/xdm/liveslak-xdm/xdm-config,'
# Remove the marker file from the filesystem root:
rm -f ${T_PX}/@MARKER@
# ---------------------
# Set up a user account,
dialog --title "@UDISTRO@ (@LIVEDE@) USER CREATION" \
--backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--msgbox "You will first get the chance to create your user account, \
and set its password.\nYour account will be added to sudoers and suauth.\n\n\
Next you will be asked to set root's password." 9 55
# This will set UFULLNAME, UACCOUNT and USHELL variables:
SeTuacct 2>&1 1> $TMP/tempresult
if [ $? = 0 ]; then
# User filled out the form, so let's get the results for
# UFULLNAME, UACCOUNT and USHELL:
source $TMP/tempresult
rm -f $TMP/tempresult
# Set a password for the new account:
UPASS=$(SeTupass $UACCOUNT)
# Create the account and set the password:
chroot ${T_PX} /usr/sbin/useradd -c "$UFULLNAME" -g users -G wheel,audio,cdrom,floppy,plugdev,video,power,netdev,lp,scanner,kmem,dialout,games,disk,input -u 1000 -d /home/${UACCOUNT} -m -s ${USHELL} ${UACCOUNT}
echo "${UACCOUNT}:${UPASS}" | chroot ${T_PX} /usr/sbin/chpasswd
unset UPASS
# Configure suauth:
cat <<EOT >${T_PX}/etc/suauth
root:${UACCOUNT}:OWNPASS
root:ALL EXCEPT GROUP wheel:DENY
EOT
chmod 600 ${LIVE_ROOTDIR}/etc/suauth
# Configure sudoers:
chmod 640 ${T_PX}/etc/sudoers
sed -i ${T_PX}/etc/sudoers -e 's/# *\(%wheel\sALL=(ALL)\sALL\)/\1/'
chmod 440 ${T_PX}/etc/sudoers
fi # End user creation
# ---------------------------
if [ "$(cat $T_PX/etc/shadow | grep 'root:' | cut -f 2 -d :)" = "" ]; then
# There is no root password yet:
UPASS=$(SeTupass root)
echo "root:${UPASS}" | chroot ${T_PX} /usr/sbin/chpasswd
unset UPASS
fi
cat << EOF > $TMP/tempmsg
@CDISTRO@ Live Edition (@LIVEDE@) has been installed to your hard drive!
We installed the ${ACT_MODS} active modules (out of ${TOT_MODS} available).
The following configuration was copied from the Live OS to your harddisk:
- console font
- default runlevel
- keyboard layout
- language setting
After finishing system configuration and before rebooting, you can add any further Live modules from /@LIVEMAIN@/addons/ and /@LIVEMAIN@/optional/ to your hard drive, using a command similar to this:
# unsquashfs -f -dest $T_PX /mnt/livemedia/@LIVEMAIN@/addons/mymodule.sxz
EOF
dialog --backtitle "@CDISTRO@ Linux Setup (Live Edition)" \
--title "POST INSTALL HINTS AND TIPS" --msgbox "`cat $TMP/tempmsg`" \
20 65
rm $TMP/tempmsg
MAINSELECT="CONFIGURE"
} # END live_post_install() function
if [ -f /usr/share/@LIVEMAIN@/setup2hd.@DISTRO@ ]; then
# If the setup2hd post-configuration file exists, source it.
# The file should re-define the live_post_install() function.
. /usr/share/@LIVEMAIN@/setup2hd.@DISTRO@
fi
# Now, execute the function - either our own built-in version
# or the re-defined function from the custom setup2hd.@DISTRO@ file.
live_post_install
# --------------------------------------------- #
# Slackware Live Edition - end install to disk: #
# --------------------------------------------- #
fi
# End liveslak installation routine.
