path: root/liveinit

#!/bin/ash
#
# Copyright 2004  Slackware Linux, Inc., Concord, CA, USA
# Copyright 2007, 2008, 2009, 2010, 2012  Patrick J. Volkerding, Sebeka, MN, USA
# Copyright 2015, 2016  Eric Hameleers, Eindhoven, NL
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
##################################################################################
# Changelog
# 10-Dec-2012 <mozes@slackware.com>
#  * Added support for the official Kernel parameters to select root filesystem
#    type ('rootfstype') and pause before attempting to mount the root filesystem
#    ('rootdelay').  The original parameters may continue to be used.
# 23-Oct-2015 <alien@slackware.com>
#  * Modified for booting as a Live filesystem.
##################################################################################

# The ISO creation script will create a filesystem with this label.
# Nevertheless, the user may have copied the ISO content to a different device.
MEDIALABEL="@MEDIALABEL@"

LIVEMAIN="@LIVEMAIN@"
MARKER="@MARKER@"
PERSISTENCE="@PERSISTENCE@"

LIVEMEDIA=""

# By default, let the media determine if we can write persistent changes:
# However, if we define TORAM=1, we will also set VIRGIN=1 since we want
# to avoid anything that writes to disk after we copy the OS to RAM.
VIRGIN=0

# Used for debugging the init; set to '1' to enable explicit pauses>
DEBUG=0

# Masochists can copy the live environment into RAM:
TORAM=0

# Perhaps we need to blacklist some kernel module(s):
BLACKLIST=""

INITRD=$(cat /initrd-name)
WAIT=$(cat /wait-for-root)
KEYMAP=$(cat /keymap)
LUKSVOL=$(cat /luksdev)
INIT=/sbin/init

PATH="/sbin:/bin:/usr/sbin:/usr/bin"

# Mount /proc and /sys:
mount -n proc /proc -t proc
mount -n sysfs /sys -t sysfs
mount -n tmpfs /run -t tmpfs -o mode=0755

if grep devtmpfs /proc/filesystems 1>/dev/null 2>/dev/null ; then
  DEVTMPFS=1
  mount -n devtmpfs /dev -t devtmpfs
fi	

# Parse command line
for ARG in $(cat /proc/cmdline); do
  case $ARG in
    0|1|2|3|4|5|6|S|s|single)
      RUNLEVEL=$ARG
    ;;
    blacklist=*)
      BLACKLIST=$(echo $ARG | cut -f2 -d=)
    ;;
    debug)
      DEBUG=1
    ;;
    debug=*)
      DEBUG=$(echo $ARG | cut -f2 -d=)
    ;;
    hostname=*)
      LIVE_HOSTNAME=$(echo $ARG | cut -f2 -d=)
    ;;
    init=*)
      INIT=$(echo $ARG | cut -f2 -d=)
    ;;
    kbd=*)
      KEYMAP=$(echo $ARG | cut -f2 -d=)
    ;;
    livemain=*)
      LIVEMAIN=$(echo $ARG | cut -f2 -d=)
    ;;
    livemedia=*)
      LIVEMEDIA=$(echo $ARG | cut -f2 -d=)
    ;;
    livepw=*)
      LIVEPW=$(echo $ARG | cut -f2 -d=)
    ;;
    load=*)
      LOAD=$(echo $ARG | cut -f2 -d=)
    ;;
    locale=*)
      LOCALE=$(echo $ARG | cut -f2 -d=)
    ;;
    luksvol=*)
      # Format: luksvol=file1[:/mountpoint1][,file1[:/mountpoint2],...]
      LUKSVOL=$(echo $ARG | cut -f2 -d=)
    ;;
    noload=*)
      NOLOAD=$(echo $ARG | cut -f2 -d=)
    ;;
    nop)
      VIRGIN=1
    ;;
    persistence=*)
      PERSISTENCE=$(echo $ARG | cut -f2 -d=)
    ;;
    rescue)
      RESCUE=1
    ;;
    swap)
      USE_SWAP=1
    ;;
    rootpw=*)
      ROOTPW=$(echo $ARG | cut -f2 -d=)
    ;;
    toram)
      TORAM=1
      VIRGIN=1 # prevent writes to disk since we are supposed to run from RAM
    ;;
    tz=*)
      TZ=$(echo $ARG | cut -f2 -d=)
    ;;
    waitforroot=*|rootdelay=*)
      WAIT=$(echo $ARG | cut -f2 -d=)
    ;;
    xkb=*)
      XKB=$(echo $ARG | cut -f2 -d=)
    ;;
  esac
done

[ $DEBUG -ge 2 ] && set -x

debugit () {
  [ $DEBUG -eq 0 ] && return
  echo "DEBUG>> -- blkid info -- :"
  blkid | while read LINE ; do echo "DEBUG>> $LINE" ; done
  echo "DEBUG>> -- mount info -- :"
  mount | while read LINE ; do echo "DEBUG>> $LINE" ; done
  echo "DEBUG>> -- Press ENTER to continue -- : "
  read JUNK
  return
}

# If udevd is available, use it to generate block devices
# else use mdev to read sysfs and generate the needed devices 
if [ -x /sbin/udevd -a -x /sbin/udevadm ]; then
  /sbin/udevd --daemon --resolve-names=never
  /sbin/udevadm trigger --subsystem-match=block --action=add
  /sbin/udevadm settle --timeout=10
else
  [ "$DEVTMPFS" != "1" ] && mdev -s
fi

# Load kernel modules (ideally this was already done by udev):
if [ ! -d /lib/modules/$(uname -r) ]; then
  echo "No kernel modules found for Linux $(uname -r)."
elif [ -x ./load_kernel_modules ]; then # use load_kernel_modules script:
  echo "${MARKER}:  Loading kernel modules from initrd image:"
  . ./load_kernel_modules 1>/dev/null 2>/dev/null
else # load modules (if any) in order:
  if ls /lib/modules/$(uname -r)/*.*o 1> /dev/null 2> /dev/null ; then
    echo "${MARKER}:  Loading kernel modules from initrd image:"
    for module in /lib/modules/$(uname -r)/*.*o ; do
      /sbin/modprobe $module 1>/dev/null 2>/dev/null
    done
    unset module
  fi
fi

# Sometimes the devices need extra time to be available.
# A root filesystem on USB is a good example of that.
sleep $WAIT
# Fire at least one blkid:
blkid 1>/dev/null 2>/dev/null

# Load a custom keyboard mapping:
if [ -n "$KEYMAP" ]; then
  echo "${MARKER}:  Loading '$KEYMAP' keyboard mapping:"
  tar xzOf /etc/keymaps.tar.gz ${KEYMAP}.bmap | loadkmap
fi

if [ "$RESCUE" = "" ]; then 
  # Initialize RAID:
  if [ -x /sbin/mdadm ]; then
    # If /etc/mdadm.conf is present, udev should DTRT on its own;
    # If not, we'll make one and go from there:
    if [ ! -r /etc/mdadm.conf ]; then
      /sbin/mdadm -E -s >/etc/mdadm.conf
      /sbin/mdadm -S -s
      /sbin/mdadm -A -s
      # This seems to make the kernel see partitions more reliably:
      fdisk -l /dev/md* 1> /dev/null 2> /dev/null
    fi
  fi

  # Scan for btrfs multi-device filesystems:
  if [ -x /sbin/btrfs ]; then
    /sbin/btrfs device scan
  fi

  # --------------------------------------------------------------------- #
  #                     SLACKWARE LIVE - START                            #
  # --------------------------------------------------------------------- #

  ## Support functions ##

  find_loop() {
    # The losetup of busybox is different from the real losetup - watch out!
    lodev=$(losetup -f)
    if [ -z "$lodev" ]; then
      # We exhausted the available loop devices, so create the block device:
      for NOD in $(seq 0 64); do
        if [ ! -b /dev/loop${NOD} ]; then
          mknod -m660 /dev/loop${NOD} b 7 ${NOD}
          break
        fi
      done
      lodev=/dev/loop${NOD}
    elif [ ! -b $lodev ]; then
      # We exhausted the available loop devices, so create the block device:
      mknod -m660 $lodev b 7 $(echo $lodev |sed %/dev/loop%%)
    fi
    echo "$lodev"
  }

  find_modloc() {
    MY_LOC="$1"

    if [ $TORAM -ne 0 ]; then
      # If we need to copy the module to RAM, we need a place for that:
      mkdir -p /mnt/live/toram
      # Copy the module to RAM before mounting it:
      MODNAME="$(basename ${MY_LOC})"
      cp ${MY_LOC} /mnt/live/toram
      MY_LOC=/mnt/live/toram/${MODNAME}
    fi

    echo "${MY_LOC}"
  }

  load_modules() {
    # SUBSYS can be 'system', 'addons', 'optional':
    SUBSYS="$1"

    if ls /mnt/media/${LIVEMAIN}/${SUBSYS}/*.sxz 1>/dev/null 2>/dev/null ; then
      for MODULE in /mnt/media/${LIVEMAIN}/${SUBSYS}/*.sxz ; do
        MODBASE="$(basename ${MODULE} .sxz)"
        if [ "$SUBSYS" = "optional" ]; then
          # Load one or more optionals by using boot parameter 'load':
          # load=mod1[,mod2[,mod3]]
          if [ -z "$LOAD" -o -z '$(echo ",${LOAD}," |grep -i ",$(echo $MODBASE |cut -d- -f2),")' ]; then
            continue
          fi
        elif [ "$SUBSYS" = "addons" ]; then
          # Skip loading one or more addons by using boot parameter 'noload':
          # noload=mod1[,mod2[,mod3]]
          if [ -n "$NOLOAD" -a -n '$(echo ",${NOLOAD}," |grep -i ",$(echo $MODBASE |cut -d- -f2),")' ]; then
            echo "$MODBASE" >> /mnt/live/modules/skipped
            continue
          fi
        fi
        MODLOC=$(find_modloc ${MODULE})
        mkdir /mnt/live/modules/${MODBASE}
        mount -t squashfs -o loop ${MODLOC} /mnt/live/modules/${MODBASE}
        RODIRS=":/mnt/live/modules/${MODBASE}${RODIRS}"
      done
    fi
  }

  ## End support functions ##

  # We need a mounted filesystem here to be able to do a switch_root later,
  # so we create one in RAM:
  if [ $TORAM -eq 1 ]; then
    RAMSIZE=90%  # need to be able to load the entire OS in RAM
  else
    RAMSIZE=50%  # the default value.
  fi
  mount -t tmpfs -o defaults,size=${RAMSIZE} none /mnt

  # Find the Slackware Live media.
  # TIP: Increase WAIT to give USB devices a chance to be seen by the kernel.
  mkdir /mnt/media
  if [ -z "$LIVEMEDIA" ]; then
    # LIVEMEDIA not specified on the boot commandline using "livemedia="
    # Filter out the block devices, only look at partitions at first:
    LIVEALL=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep "[0-9]$")
    LIVEMEDIA=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep "[0-9]$" |head -1)
    if [ ! -z "$LIVEMEDIA" ]; then
      # That was easy... we found the media straight away.
      # Determine filesystem type ('iso9660' means we found a CDROM/DVD)
      LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev)
      mount -t $LIVEFS -o ro $LIVEMEDIA /mnt/media
    else
      LIVEALL=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep -v "[0-9]$")
      LIVEMEDIA=$(blkid |grep LABEL="\"$MEDIALABEL\"" |cut -d: -f1 |grep -v "[0-9]$" |head -1)
      if [ ! -z "$LIVEMEDIA" ]; then
        # We found a block device with the correct label (non-UEFI media).
        # Determine filesystem type ('iso9660' means we found a CDROM/DVD)
        LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev)
        mount -t $LIVEFS -o ro $LIVEMEDIA /mnt/media
      else
        # Bummer... label not found; the ISO was extracted to a different device.
        # Separate partitions from block devices, look at partitions first:
        for SLDEVICE in $(blkid |cut -d: -f1 |grep "[0-9]$") $(blkid |cut -d: -f1 |grep -v "[0-9]$") ; do
          SLFS=$(blkid $SLDEVICE |rev |cut -d'"' -f2 |rev)
          mount -t $SLFS -o ro $SLDEVICE /mnt/media
          if [ -d /mnt/media/${LIVEMAIN} ]; then
            # Found our media!
            LIVEALL=$SLDEVICE
            LIVEMEDIA=$SLDEVICE
            LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev)
            break
          else
            umount $SLDEVICE
            unset SLDEVICE
          fi
        done
      fi
    fi
    if [ -n "$LIVEMEDIA" ]; then
      # Gotcha!
      break
    fi
    sleep 1
  else
    # LIVEMEDIA was specified on the boot commandline using "livemedia="
    if [ ! -b "$LIVEMEDIA" ]; then
      # Passed a UUID or LABEL?
      LIVEALL=$(findfs UUID=$LIVEMEDIA 2>/dev/null) || LIVEALL=$(findfs LABEL=$LIVEMEDIA 2>/dev/null)
      if [ -z "$LIVEALL" ]; then
        echo "${MARKER}:  Live media '$LIVEMEDIA' not found... trouble ahead."
      else
        LIVEMEDIA="$LIVEALL"
      fi
    else
      LIVEALL="$LIVEMEDIA"
    fi
    LIVEFS=$(blkid $LIVEMEDIA |rev |cut -d'"' -f2 |rev)
    mount -t $LIVEFS -o ro $LIVEMEDIA /mnt/media
  fi

  # Finished determining the media availability, it should be mounted now.

  if [ ! -z "$LIVEMEDIA" ]; then
    echo "${MARKER}:  Live media found at ${LIVEMEDIA}."
    if [ ! -d /mnt/media/${LIVEMAIN} ]; then
      echo "${MARKER}:  However, live media was not mounted... trouble ahead."
    fi
    if [ "$LIVEMEDIA" != "$LIVEALL" ]; then
      echo "${MARKER}:  NOTE: Multiple partitions with '$MEDIALABEL' label were found ($(echo $LIVEALL))... success not guaranteed."
    fi
  else
    echo "${MARKER}:  No live media found... trouble ahead."
    echo "${MARKER}:  Try adding \"rootdelay=20\" to the boot command."
  fi

  debugit

  # Start assembling our live system components below /mnt/live :
  mkdir /mnt/live

  # Mount our squashed modules (.sxz extension).
  mkdir /mnt/live/modules

  if [ $TORAM -ne 0 ]; then
    echo "${MARKER}:  Copying Live modules to RAM, please be patient."
  fi

  # Modules were created in specific order and will be mounted in that order.
  # In the lowerdirs parameter for the overlay, the module with the highest
  # number (i.e. created last) will be leftmost in a colon-separated list:
  RODIRS=""

  # First, the base Slackware system components:
  load_modules system

  # Next, the add-on (3rd party etc) components, if any:
  # Remember, module name must adhere to convention: "NNNN-modname-*.sxz"
  # where 'N' is a digit and 'modname' must not contain a dash '-'.
  load_modules addons

  # And finally any explicitly requested optionals (like nvidia drivers):
  # Remember, module name must adhere to convention: "NNNN-modname-*.sxz"
  # where 'N' is a digit and 'modname' must not contain a dash '-'.
  load_modules optional

  # Get rid of the starting colon:
  RODIRS=$(echo $RODIRS |cut -c2-)

  if [ $TORAM -ne 0 ]; then
    echo "${MARKER}:  Live OS copied to RAM, you can remove the Live medium."
    if [ "LIVEFS" = "iso9660" ]; then
      eject ${LIVEMEDIA}
    fi
  fi

  # Setup persistence in case our media is writable, *and* the user
  # has created a directory "persistence" in the root of the media.
  # otherwise we let the block changes accumulate in RAM only.

  # Create the mount point for the writable upper directory of the overlay:
  # Assume the default to be a readonly media - we write to RAM:
  UPPERDIR=/mnt/live/changes
  OVLWORK=/mnt/live/.ovlwork
  if [ "$VIRGIN" = "0" ]; then
    if [ "LIVEFS" != "iso9660" -a -d /mnt/media/${PERSISTENCE} ]; then
      # Looks OK, but we need to remount the media in order to write
      # to the persistence directory:
      mount -o remount,rw /mnt/media
      # Try a write... just to be dead sure:
      if touch /mnt/media/${PERSISTENCE}/.rwtest 2>/dev/null && rm /mnt/media/${PERSISTENCE}/.rwtest 2>/dev/null ; then
        # Writable media and we are allowed to write to it.
        echo "${MARKER}:  Writing persistent changes to media directory '/${PERSISTENCE}'."
        UPPERDIR=/mnt/media/${PERSISTENCE}
        OVLWORK=/mnt/media/.ovlwork
      fi
    elif [ "LIVEFS" != "iso9660" -a -f /mnt/media/${PERSISTENCE}.img ]; then
      # Use a container file; the filesystem needs to be writable:
      mount -o remount,rw /mnt/media
      # Find a free loop device to mount the persistence container file:
      prdev=$(find_loop)
      prdir=${PERSISTENCE}_$(od -An -N1 -tu1 /dev/urandom |tr -d ' ')
      mkdir -p /mnt/live/${prdir}
      losetup $prdev /mnt/media/${PERSISTENCE}.img
      # Check if the persistence container is LUKS encrypted:
      if cryptsetup isLuks $prdev 1>/dev/null 2>/dev/null ; then
        echo "Unlocking LUKS encrypted persistence file '/${PERSISTENCE}.img'"
        cryptsetup luksOpen $prdev ${PERSISTENCE} </dev/tty0 >/dev/tty0 2>&1
        if [ $? -ne 0 ]; then
          echo "${MARKER}:  Failed to unlock persistence file '/${PERSISTENCE}.img'."
          echo "${MARKER}:  Falling back to RAM."
        else
          # LUKS properly unlocked; from now on use the mapper device instead:
          prdev=/dev/mapper/${PERSISTENCE}
        fi
      fi
      prfs=$(blkid $prdev |rev |cut -d'"' -f2 |rev)
      mount -t $prfs $prdev /mnt/live/${prdir} 2>/dev/null
      if [ $? -ne 0 ]; then
        echo "${MARKER}:  Failed to mount persistence file '/${PERSISTENCE}.img'."
        echo "${MARKER}:  Falling back to RAM."
      else
        echo "${MARKER}:  Writing persistent changes to file '/${PERSISTENCE}.img'."
        UPPERDIR=/mnt/live/${prdir}/${PERSISTENCE}
        OVLWORK=/mnt/live/${prdir}/.ovlwork
      fi
    fi
  else
    echo "${MARKER}:  Writing changes to RAM - no persistence:"
    if [ ! -z "$LUKSVOL" ]; then
      # Even without persistence, we need to be able to write to the partition
      # if we are using a LUKS container file:
      mount -o remount,rw /mnt/media
    fi
  fi

  # Create the writable upper directory, plus the workdir which is required
  # for overlay to function (the two must be in the same POSIX filesystem):
  [ ! -d ${UPPERDIR} ] && mkdir -p ${UPPERDIR}
  [ ! -d ${OVLWORK} ] && mkdir -p ${OVLWORK}

  # Create the overlay of readonly and writable directories:
  mkdir -p /mnt/overlay
  mount -t overlay -o workdir=${OVLWORK},upperdir=${UPPERDIR},lowerdir=${RODIRS} overlay /mnt/overlay
  if [ $? -ne 0 -a "$VIRGIN" = "0" ]; then
    # Failed to create the persistent overlay - try without persistence:
    echo "${MARKER}:  Failed to create persistent overlay, attempting to continue in RAM."
    UPPERDIR=/mnt/live/changes
    OVLWORK=/mnt/live/.ovlwork
    mkdir -p ${UPPERDIR}
    mkdir -p ${OVLWORK}
    mount -t overlay -o workdir=${OVLWORK},upperdir=${UPPERDIR},lowerdir=${RODIRS} overlay /mnt/overlay
  fi

  debugit

  # Make the underpinning RAM fs accessible in the live system (for fun):
  mkdir -p /mnt/overlay/mnt/live
  mount --bind /mnt/live /mnt/overlay/mnt/live

  if [ $TORAM -eq 0 ]; then
    # Same for the Linux filesystem on the USB stick:
    mkdir -p /mnt/overlay/mnt/livemedia
    mount --bind /mnt/media /mnt/overlay/mnt/livemedia
  fi

  if [ ! -z "$USE_SWAP" ]; then
    # Use any available swap device:
    for SWAPD in $(blkid |grep TYPE="\"swap\"" |cut -d: -f1) ; do
      echo "${MARKER}:  Enabling swapping to '$SWAPD'"
      echo "$SWAPD  swap  swap defaults  0  0" >> /mnt/overlay/etc/fstab
    done
  fi

  if [ ! -z "$KEYMAP" ]; then
    # Configure custom keyboard mapping in console and X:
    echo "${MARKER}:  Switching live console to '$KEYMAP' keyboard"
    cat <<EOT > /mnt/overlay/etc/rc.d/rc.keymap
#!/bin/sh
# Load the keyboard map.  More maps are in /usr/share/kbd/keymaps.
if [ -x /usr/bin/loadkeys ]; then
 /usr/bin/loadkeys ${KEYMAP}
fi
EOT
    chmod 755 /mnt/overlay/etc/rc.d/rc.keymap
  fi
  if [ ! -z "$KEYMAP" -o ! -z "$XKB" ]; then
    # Set a keyboard mapping in X.Org, derived from the console map if needed:
    # Variable XKB can be set to "XkbLayout,XkbVariant", like "xkb=ch,fr"
    # You can set just the XkbVariant by adding something like "kbd=ch xkb=,fr"
    XKBLAYOUT=$(echo $XKB |cut -d, -f1)
    XKBVARIANT=$(echo $XKB |cut -d, -f2)
    # Ensure that XKBLAYOUT gets a value; XKBVARIANT is allowed to be empty.
    if [ -z "$XKBLAYOUT" ]; then
      if [ -z "$KEYMAP" ]; then
        XKBLAYOUT="us"
      else
        XKBLAYOUT="$(echo $KEYMAP |cut -c1-2)"
      fi
    fi
  else
    XKBLAYOUT="us"
  fi
  echo "${MARKER}:  Switching live X desktop to '$XKBLAYOUT' keyboard"
  # Germans use the AltGr key, so Scroll Lock will be their Compose Key:
  if [ "$XKBLAYOUT" = "de" ]; then
    XKBOPTIONS="compose:sclk"
  else
    XKBOPTIONS="compose:ralt"
  fi
  # If the layout is not 'us' then add 'us' as a secondary nevertheless:
  if [ "$XKBLAYOUT" != "us" ]; then
    XKBLAYOUT="$XKBLAYOUT,us"
    XKBVARIANT="$XKBVARIANT,"
    XKBOPTIONS="grp:alt_shift_toggle,grp_led:scroll,$XKBOPTIONS"
  fi
  mkdir -p /mnt/overlay/etc/X11/xorg.conf.d
  cat <<EOT > /mnt/overlay/etc/X11/xorg.conf.d/30-keyboard.conf
Section "InputClass"
  Identifier "keyboard-all"
  Driver "evdev"
  Option "XkbLayout" "$XKBLAYOUT"
  Option "XkbVariant" "$XKBVARIANT"
  Option "XkbOptions" "$XKBOPTIONS"
  MatchIsKeyboard "on"
EndSection
EOT

  if [ ! -z "$LOCALE" ]; then
    # Configure custom locale:
    echo "${MARKER}:  Switching to '$LOCALE' locale"
    sed -i -e "s/^ *export LANG=.*/export LANG=${LOCALE}/" /mnt/overlay/etc/profile.d/lang.sh
  fi

  if [ ! -z "$TZ" -a -f /mnt/overlay/usr/share/zoneinfo/${TZ} ]; then
    # Configure custom timezone:
    echo "${MARKER}:  Configuring timezone '$TZ'"
    cp /mnt/overlay/usr/share/zoneinfo/${TZ} /mnt/overlay/etc/localtime
    cp /mnt/overlay/usr/share/zoneinfo/${TZ} /mnt/overlay/etc/localtime
    rm /mnt/overlay/etc/localtime-copied-from
    ln -s /usr/share/zoneinfo/${TZ} /mnt/overlay/etc/localtime-copied-from
    # Configure the hardware clock to be interpreted as localtime and not UTC:
    cat <<EOT > /mnt/overlay/etc/hardwareclock
# /etc/hardwareclock
#
# Tells how the hardware clock time is stored.
# You should run timeconfig to edit this file.
localtime
EOT
  fi

  if [ ! -z "$LIVEPW" ]; then
    # User entered a custom live password on the boot commandline:
    echo "${MARKER}:  Changing password for user 'live'."
    chroot /mnt/overlay /usr/sbin/chpasswd <<EOPW
live:${LIVEPW}
EOPW
  fi

  if [ ! -z "$ROOTPW" ]; then
    # User entered a custom root password on the boot commandline:
    echo "${MARKER}:  Changing password for user 'root'."
    chroot /mnt/overlay /usr/sbin/chpasswd <<EOPW
root:${ROOTPW}
EOPW
  fi

  if [ ! -z "$LIVE_HOSTNAME" ]; then
    # User entered a custom hostname on the boot commandline:
    echo "${MARKER}:  Changing hostname to '$LIVE_HOSTNAME'."
    echo "${LIVE_HOSTNAME}.example.net" > /mnt/overlay/etc/HOSTNAME
    if [ -f /mnt/overlay/etc/NetworkManager/NetworkManager.conf ]; then
      sed -i -e "s/^hostname=.*/hostname=${LIVE_HOSTNAME}/" \
        /mnt/overlay/etc/NetworkManager/NetworkManager.conf
    fi
    sed -i -e "s/^\(127.0.0.1\t*\)@DARKSTAR@.*/\1${LIVE_HOSTNAME}.example.net ${LIVE_HOSTNAME}/" /mnt/overlay/etc/hosts
  fi

  # Blacklist kernel modules if requested:
  if [ ! -z "$BLACKLIST" ]; then
    mkdir -p /mnt/overlay/etc/modprobe.d
    echo "#Slackware Live blacklist" > /mnt/overlay/etc/modprobe.d/BLACKLIST-live.conf
    for kernelmod in $(echo $BLACKLIST |tr ',' ' '); do
      echo "blacklist $kernelmod" >> /mnt/overlay/etc/modprobe.d/BLACKLIST-live.conf
    done
  fi

  # Delete ALSA state file, the Live OS may be booted on different computers:
  rm -f /mnt/overlay/var/lib/alsa/asound.state

  # Copy contents of rootcopy directory (may be empty) to overlay:
  cp -af /mnt/media/${LIVEMAIN}/rootcopy/* /mnt/overlay/ 2>/dev/null

  # Bind any LUKS container into the Live filesystem:
  if [ ! -z "$LUKSVOL" ]; then
    for luksvol in $(echo $LUKSVOL |tr ',' ' '); do
      luksfil="$(echo $luksvol |cut -d: -f1)"
      luksmnt="$(echo $luksvol |cut -d: -f2)"
      luksnam="$(echo $(basename $luksfil) |tr '.' '_')"
      if [ "$luksmnt" = "$luksfil" ]; then
        # No optional mount point specified, so we use the default: /home/
        luksmnt="/home"
      fi

      # Find a free loop device:
      lodev=$(find_loop)

      losetup $lodev /mnt/media/$luksfil
      echo "Unlocking LUKS encrypted container '$luksfil' at mount point '$luksmnt'"
      cryptsetup luksOpen $lodev $luksnam </dev/tty0 >/dev/tty0 2>&1
      if [ $? -ne 0 ]; then
        echo "${MARKER}:  Failed to unlock LUKS container '$luksfil'... trouble ahead."
      else
        # Create the mount directory if it does not exist (unlikely):
        mkdir -p /mnt/overlay/$luksmnt

        # Let Slackware mount the unlocked container:
        luksfs=$(blkid /dev/mapper/$luksnam |rev |cut -d'"' -f2 |rev)
        if ! grep -q /dev/mapper/$luksnam /mnt/overlay/etc/fstab ; then
          echo "/dev/mapper/$luksnam  $luksmnt  $luksfs  defaults  1  1" >> /mnt/overlay/etc/fstab
        fi
        # On shutdown, ensure that the container gets locked again:
        if ! grep -q "$luksnam $luksmnt" /mnt/overlay/etc/crypttab ; then
          echo "$luksnam $luksmnt" >> /mnt/overlay/etc/crypttab
        fi
      fi
    done
  fi

  # --------------------------------------------------------------------- #
  #                     SLACKWARE LIVE - !END!                            #
  # --------------------------------------------------------------------- #

  # Minimal changes to the original Slackware init follow:

  # Switch to real root partition:
  /sbin/udevadm settle --timeout=10
  echo 0x0100 > /proc/sys/kernel/real-root-dev
  
  if [ ! -r /mnt/overlay/${INIT} ]; then
    echo "ERROR:  No ${INIT} found on rootdev (or not mounted).  Trouble ahead."
    echo "        You can try to fix it. Type 'exit' when things are done." 
    echo
    /bin/sh
  fi
else
  echo
  echo "RESCUE mode"
  echo
  echo "        You can try to fix or rescue your system now. If you want"
  echo "        to boot into your fixed system, mount your root filesystem"
  echo "        read-only under /mnt:"
  echo
  echo "            # mount -o ro -t filesystem root_device /mnt"
  echo
  echo "        Type 'exit' when things are done."
  echo
  /bin/sh
fi

# Need to make sure OPTIONS+="db_persist" exists for all dm devices
# That should be handled in /sbin/mkinitrd now
/sbin/udevadm info --cleanup-db
/sbin/udevadm control --exit

unset ERR
umount /proc
umount /sys
umount /run
# We disable the filesystem checking code in /etc/rc.d/rc.S,
# so we need to keep the fs writable here.
#mount -o ro,remount /mnt/overlay 2>/dev/null
echo "${MARKER}:  Slackware Live system is ready."

echo "${MARKER}:  exiting"
exec switch_root /mnt/overlay $INIT $RUNLEVEL